Common Event Format (CEF)

Collect logs from CEF Logs with Elastic Agent.


Version	2.17.1 (View all)
Compatible Kibana version(s)	8.6.1 or higher
Supported Serverless project types What's this?	Security Observability
Subscription level What's this?	Basic
Level of support What's this?	Elastic

This is an integration for parsing Common Event Format (CEF) data. It can accept data over syslog or read it from a file.

CEF data is a format like

When syslog is used as the transport the CEF data becomes the message that is contained in the syslog envelope. This integration will parse the syslog timestamp if it is present. Depending on the syslog RFC used the message will have a format like one of these:

In both cases the integration will use the syslog timestamp as the @timestamp unless the CEF data contains a device receipt timestamp.

The Elastic Agent's decode_cef processor is applied to parse the CEF encoded data. The decoded data is written into a cef object field. Lastly any Elastic Common Schema (ECS) fields that can be populated with the CEF data are populated.

Compatibility

Forcepoint NGFW Security Management Center

This module will process CEF data from Forcepoint NGFW Security Management Center (SMC). In the SMC configure the logs to be forwarded to the address set in var.syslog_host in format CEF and service UDP on var.syslog_port. Instructions can be found in KB 15002 for configuring the SMC.

Testing was done with CEF logs from SMC version 6.6.1 and custom string mappings were taken from 'CEF Connector Configuration Guide' dated December 5, 2011.

Check Point devices

This module will parse CEF data from Check Point devices as documented in Log Exporter CEF Field Mappings.

Check Point CEF extensions are mapped as follows:

CEF Extension	CEF Label value	ECS Fields	Non-ECS Field
cp_app_risk	-	event.risk_score	checkpoint.app_risk
cp_severity	-	event.severity	checkpoint.severity
baseEventCount	-	-	checkpoint.event_count
deviceExternalId	-	observer.type	-
deviceFacility	-	observer.type	-
deviceInboundInterface	-	observer.ingress.interface.name	-
deviceOutboundInterface	-	observer.egress.interface.name	-
externalId	-	-	checkpoint.uuid
fileHash	-	file.hash.{md5,sha1}	-
reason	-	-	checkpoint.termination_reason
requestCookies	-	-	checkpoint.cookie
sourceNtDomain	-	dns.question.name	-
Signature	-	vulnerability.id	-
Recipient	-	email.to.address	-
Sender	-	email.from.address	-
deviceCustomFloatingPoint1	update version	observer.version	-
deviceCustomIPv6Address2	source ipv6 address	source.ip	-
deviceCustomIPv6Address3	destination ipv6 address	destination.ip	-
deviceCustomNumber1	elapsed time in seconds	event.duration	-
deviceCustomNumber1	email recipients number	-	checkpoint.email_recipients_num
deviceCustomNumber1	payload	network.bytes	-
deviceCustomNumber2	icmp type	-	checkpoint.icmp_type
deviceCustomNumber2	duration in seconds	event.duration	-
deviceCustomNumber3	icmp code	-	checkpoint.icmp_code
deviceCustomString1	connectivity state	-	checkpoint.connectivity_state
deviceCustomString1	application rule name	rule.name	-
deviceCustomString1	threat prevention rule name	rule.name	-
deviceCustomString1	voip log type	-	checkpoint.voip_log_type
deviceCustomString1	dlp rule name	rule.name	-
deviceCustomString1	email id	-	checkpoint.email_id
deviceCustomString2	category	-	checkpoint.category
deviceCustomString2	email subject	email.subject	checkpoint.email_subject
deviceCustomString2	sensor mode	-	checkpoint.sensor_mode
deviceCustomString2	protection id	-	checkpoint.protection_id
deviceCustomString2	scan invoke type	-	checkpoint.integrity_av_invoke_type
deviceCustomString2	update status	-	checkpoint.update_status
deviceCustomString2	peer gateway	-	checkpoint.peer_gateway
deviceCustomString2	categories	rule.category	-
deviceCustomString6	application name	network.application	-
deviceCustomString6	virus name	-	checkpoint.virus_name
deviceCustomString6	malware name	-	checkpoint.spyware_name
deviceCustomString6	malware family	-	checkpoint.malware_family
deviceCustomString3	user group	group.name	-
deviceCustomString3	incident extension	-	checkpoint.incident_extension
deviceCustomString3	protection type	-	checkpoint.protection_type
deviceCustomString3	email spool id	-	checkpoint.email_spool_id
deviceCustomString3	identity type	-	checkpoint.identity_type
deviceCustomString4	malware status	-	checkpoint.spyware_status
deviceCustomString4	threat prevention rule id	rule.id	-
deviceCustomString4	scan result	-	checkpoint.scan_result
deviceCustomString4	tcp flags	-	checkpoint.tcp_flags
deviceCustomString4	destination os	os.name	-
deviceCustomString4	protection name	-	checkpoint.protection_name
deviceCustomString4	email control	-	checkpoint.email_control
deviceCustomString4	frequency	-	checkpoint.frequency
deviceCustomString4	user response	-	checkpoint.user_status
deviceCustomString5	matched category	rule.category	-
deviceCustomString5	vlan id	network.vlan.id	-
deviceCustomString5	authentication method	-	checkpoint.auth_method
deviceCustomString5	email session id	email.message_id	checkpoint.email_session_id
deviceCustomDate2	subscription expiration	-	checkpoint.subs_exp
deviceFlexNumber1	confidence	-	checkpoint.confidence_level
deviceFlexNumber2	performance impact	-	checkpoint.performance_impact
deviceFlexNumber2	destination phone number	-	checkpoint.dst_phone_number
flexString1	application signature id	-	checkpoint.app_sig_id
flexString2	malware action	rule.description	-
flexString2	attack information	event.action	-
rule_uid	-	rule.uuid	-
ifname	-	observer.ingress.interface.name	-
inzone	-	observer.ingress.zone	-
outzone	-	observer.egress.zone	-
product	-	observer.product	-

Logs

CEF log

This is the CEF log dataset.

An example event for log looks as following:

{
    "@timestamp": "2023-04-19T09:52:39.939Z",
    "agent": {
        "ephemeral_id": "1e43410c-3849-4180-9c14-e3264e4a47e6",
        "id": "f1ee4a83-b99b-4611-925d-b83b001f8b86",
        "name": "docker-fleet-agent",
        "type": "filebeat",
        "version": "8.6.2"
    },
    "cef": {
        "device": {
            "event_class_id": "18",
            "product": "Vaporware",
            "vendor": "Elastic",
            "version": "1.0.0-alpha"
        },
        "extensions": {
            "destinationAddress": "192.168.10.1",
            "destinationPort": 443,
            "eventId": 3457,
            "requestContext": "https://www.google.com",
            "requestMethod": "POST",
            "requestUrl": "https://www.example.com/cart",
            "sourceAddress": "89.160.20.156",
            "sourceGeoLatitude": 38.915,
            "sourceGeoLongitude": -77.511,
            "sourcePort": 33876,
            "sourceServiceName": "httpd",
            "transportProtocol": "TCP"
        },
        "name": "Web request",
        "severity": "low",
        "version": "0"
    },
    "data_stream": {
        "dataset": "cef.log",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "ip": "192.168.10.1",
        "port": 443
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "f1ee4a83-b99b-4611-925d-b83b001f8b86",
        "snapshot": false,
        "version": "8.6.2"
    },
    "event": {
        "agent_id_status": "verified",
        "code": "18",
        "dataset": "cef.log",
        "id": "3457",
        "ingested": "2023-04-19T09:52:40Z",
        "severity": 0
    },
    "http": {
        "request": {
            "method": "POST",
            "referrer": "https://www.google.com"
        }
    },
    "input": {
        "type": "udp"
    },
    "log": {
        "source": {
            "address": "172.29.0.4:33227"
        }
    },
    "message": "Web request",
    "network": {
        "community_id": "1:UgazGyZMuRDtuImGjF+6GveZFw0=",
        "transport": "tcp"
    },
    "observer": {
        "product": "Vaporware",
        "vendor": "Elastic",
        "version": "1.0.0-alpha"
    },
    "related": {
        "ip": [
            "192.168.10.1",
            "89.160.20.156"
        ]
    },
    "source": {
        "as": {
            "number": 29518,
            "organization": {
                "name": "Bredband2 AB"
            }
        },
        "geo": {
            "city_name": "Linköping",
            "continent_name": "Europe",
            "country_iso_code": "SE",
            "country_name": "Sweden",
            "location": {
                "lat": 58.4167,
                "lon": 15.6167
            },
            "region_iso_code": "SE-E",
            "region_name": "Östergötland County"
        },
        "ip": "89.160.20.156",
        "port": 33876,
        "service": {
            "name": "httpd"
        }
    },
    "tags": [
        "cef",
        "forwarded"
    ],
    "url": {
        "original": "https://www.example.com/cart"
    }
}

Exported fields

Field	Description	Type
@timestamp	Event timestamp.	date
cef.device.event_class_id	Unique identifier of the event type.	keyword
cef.device.product	Product of the device that produced the message.	keyword
cef.device.vendor	Vendor of the device that produced the message.	keyword
cef.device.version	Version of the product that produced the message.	keyword
cef.extensions.TrendMicroDsDetectionConfidence		keyword
cef.extensions.TrendMicroDsFileMD5		keyword
cef.extensions.TrendMicroDsFileSHA1		keyword
cef.extensions.TrendMicroDsFileSHA256		keyword
cef.extensions.TrendMicroDsFrameType		keyword
cef.extensions.TrendMicroDsMalwareTarget		keyword
cef.extensions.TrendMicroDsMalwareTargetType		keyword
cef.extensions.TrendMicroDsPacketData		keyword
cef.extensions.TrendMicroDsRelevantDetectionNames		keyword
cef.extensions.TrendMicroDsTenant		keyword
cef.extensions.TrendMicroDsTenantId		keyword
cef.extensions.ad		flattened
cef.extensions.agentAddress	The IP address of the ArcSight connector that processed the event.	ip
cef.extensions.agentHostName	The hostname of the ArcSight connector that processed the event.	keyword
cef.extensions.agentId	The agent ID of the ArcSight connector that processed the event.	keyword
cef.extensions.agentMacAddress	The MAC address of the ArcSight connector that processed the event.	keyword
cef.extensions.agentReceiptTime	The time at which information about the event was received by the ArcSight connector.	date
cef.extensions.agentTimeZone	The agent time zone of the ArcSight connector that processed the event.	keyword
cef.extensions.agentType	The agent type of the ArcSight connector that processed the event.	keyword
cef.extensions.agentVersion	The version of the ArcSight connector that processed the event.	keyword
cef.extensions.agentZoneURI		keyword
cef.extensions.aggregationType		keyword
cef.extensions.applicationProtocol	Application level protocol, example values are HTTP, HTTPS, SSHv2, Telnet, POP, IMPA, IMAPS, and so on.	keyword
cef.extensions.assetCriticality		keyword
cef.extensions.baseEventCount	A count associated with this event. How many times was this same event observed? Count can be omitted if it is 1.	long
cef.extensions.bytesIn	Number of bytes transferred inbound, relative to the source to destination relationship, meaning that data was flowing from source to destination.	long
cef.extensions.bytesOut	Number of bytes transferred outbound relative to the source to destination relationship. For example, the byte number of data flowing from the destination to the source.	long
cef.extensions.categoryBehavior	Action or a behavior associated with an event. It's what is being done to the object (ArcSight).	keyword
cef.extensions.categoryDeviceGroup	General device group like Firewall (ArcSight).	keyword
cef.extensions.categoryDeviceType	Device type. Examples - Proxy, IDS, Web Server (ArcSight).	keyword
cef.extensions.categoryObject	Object that the event is about. For example it can be an operating sytem, database, file, etc (ArcSight).	keyword
cef.extensions.categoryOutcome	Outcome of the event (e.g. sucess, failure, or attempt) (ArcSight).	keyword
cef.extensions.categorySignificance	Characterization of the importance of the event (ArcSight).	keyword
cef.extensions.categoryTechnique	Technique being used (e.g. /DoS) (ArcSight).	keyword
cef.extensions.cp_app_risk		keyword
cef.extensions.cp_severity		keyword
cef.extensions.destinationAddress	Identifies the destination address that the event refers to in an IP network. The format is an IPv4 address.	ip
cef.extensions.destinationHostName	Identifies the destination that an event refers to in an IP network. The format should be a fully qualified domain name (FQDN) associated with the destination node, when a node is available.	keyword
cef.extensions.destinationMacAddress	Six colon-separated hexadecimal numbers.	keyword
cef.extensions.destinationNtDomain	Outcome of the event (e.g. sucess, failure, or attempt) (ArcSight).	keyword
cef.extensions.destinationPort	The valid port numbers are between 0 and 65535.	long
cef.extensions.destinationServiceName	The service targeted by this event.	keyword
cef.extensions.destinationTranslatedAddress	Identifies the translated destination that the event refers to in an IP network.	ip
cef.extensions.destinationTranslatedPort	Port after it was translated; for example, a firewall. Valid port numbers are 0 to 65535.	long
cef.extensions.destinationUserName	Identifies the destination user by name. This is the user associated with the event's destination. Email addresses are often mapped into the UserName fields. The recipient is a candidate to put into this field.	keyword
cef.extensions.destinationUserPrivileges	The typical values are "Administrator", "User", and "Guest". This identifies the destination user's privileges. In UNIX, for example, activity executed on the root user would be identified with destinationUser Privileges of "Administrator".	keyword
cef.extensions.deviceAction	Action taken by the device.	keyword
cef.extensions.deviceAddress	Identifies the device address that an event refers to in an IP network.	ip
cef.extensions.deviceAssetId		keyword
cef.extensions.deviceCustomDate2	One of two timestamp fields available to map fields that do not apply to any other in this dictionary.	keyword
cef.extensions.deviceCustomDate2Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomIPv6Address1	One of four IPv6 address fields available to map fields that do not apply to any other in this dictionary.	ip
cef.extensions.deviceCustomIPv6Address1Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomIPv6Address2	One of four IPv6 address fields available to map fields that do not apply to any other in this dictionary.	ip
cef.extensions.deviceCustomIPv6Address2Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomIPv6Address3	One of four IPv6 address fields available to map fields that do not apply to any other in this dictionary.	ip
cef.extensions.deviceCustomIPv6Address3Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomIPv6Address4	One of four IPv6 address fields available to map fields that do not apply to any other in this dictionary.	ip
cef.extensions.deviceCustomIPv6Address4Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomNumber1	One of three number fields available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	long
cef.extensions.deviceCustomNumber1Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomNumber2	One of three number fields available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	long
cef.extensions.deviceCustomNumber2Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomNumber3	One of three number fields available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	long
cef.extensions.deviceCustomNumber3Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomString1	One of six strings available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	keyword
cef.extensions.deviceCustomString1Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomString2	One of six strings available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	keyword
cef.extensions.deviceCustomString2Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomString3	One of six strings available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	keyword
cef.extensions.deviceCustomString3Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomString4	One of six strings available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	keyword
cef.extensions.deviceCustomString4Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomString5	One of six strings available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	keyword
cef.extensions.deviceCustomString5Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceCustomString6	One of six strings available to map fields that do not apply to any other in this dictionary. Use sparingly and seek a more specific, dictionary supplied field when possible.	keyword
cef.extensions.deviceCustomString6Label	All custom fields have a corresponding label field. Each of these fields is a string and describes the purpose of the custom field.	keyword
cef.extensions.deviceDirection	Any information about what direction the observed communication has taken. The following values are supported - "0" for inbound or "1" for outbound.	long
cef.extensions.deviceEventCategory	Represents the category assigned by the originating device. Devices often use their own categorization schema to classify event. Example "/Monitor/Disk/Read".	keyword
cef.extensions.deviceExternalId	A name that uniquely identifies the device generating this event.	keyword
cef.extensions.deviceFacility	The facility generating this event. For example, Syslog has an explicit facility associated with every event.	keyword
cef.extensions.deviceHostName	The format should be a fully qualified domain name (FQDN) associated with the device node, when a node is available.	keyword
cef.extensions.deviceInboundInterface	Interface on which the packet or data entered the device.	keyword
cef.extensions.deviceOutboundInterface	Interface on which the packet or data left the device.	keyword
cef.extensions.deviceProcessName	Process name associated with the event. An example might be the process generating the syslog entry in UNIX.	keyword
cef.extensions.deviceReceiptTime	The time at which the event related to the activity was received. The format is MMM dd yyyy HH:mm:ss or milliseconds since epoch (Jan 1st 1970)	keyword
cef.extensions.deviceSeverity		keyword
cef.extensions.deviceTimeZone	The time zone for the device generating the event.	keyword
cef.extensions.deviceZoneID		keyword
cef.extensions.deviceZoneURI	Thee URI for the Zone that the device asset has been assigned to in ArcSight.	keyword
cef.extensions.dvc	This field is used by Trend Micro if the hostname is an IPv4 address.	ip
cef.extensions.dvchost	This field is used by Trend Micro for hostnames and IPv6 addresses.	keyword
cef.extensions.eventAnnotationAuditTrail		keyword
cef.extensions.eventAnnotationEndTime		date
cef.extensions.eventAnnotationFlags		keyword
cef.extensions.eventAnnotationManagerReceiptTime		date
cef.extensions.eventAnnotationModificationTime		date
cef.extensions.eventAnnotationStageUpdateTime		date
cef.extensions.eventAnnotationVersion		keyword
cef.extensions.eventId	This is a unique ID that ArcSight assigns to each event.	long
cef.extensions.fileHash	Hash of a file.	keyword
cef.extensions.filePath	Full path to the file, including file name itself.	keyword
cef.extensions.fileSize	Size of the file.	long
cef.extensions.fileType	Type of file (pipe, socket, etc.)	keyword
cef.extensions.filename	Name of the file only (without its path).	keyword
cef.extensions.ifname		keyword
cef.extensions.inzone		keyword
cef.extensions.layer_name		keyword
cef.extensions.layer_uuid		keyword
cef.extensions.locality		keyword
cef.extensions.logid		keyword
cef.extensions.loguid		keyword
cef.extensions.managerReceiptTime	When the Arcsight ESM received the event.	date
cef.extensions.match_id		keyword
cef.extensions.message	An arbitrary message giving more details about the event. Multi-line entries can be produced by using \n as the new line separator.	keyword
cef.extensions.method	HTTP request method. The value should retain its casing from the original event. For example, `GET`, `get`, and `GeT` are all considered valid values for this field.	keyword
cef.extensions.modelConfidence		keyword
cef.extensions.nat_addtnl_rulenum		keyword
cef.extensions.nat_rulenum		keyword
cef.extensions.oldFileHash	Hash of the old file.	keyword
cef.extensions.origin		keyword
cef.extensions.originalAgentAddress		keyword
cef.extensions.originalAgentHostName		keyword
cef.extensions.originalAgentId		keyword
cef.extensions.originalAgentType		keyword
cef.extensions.originalAgentVersion		keyword
cef.extensions.originalAgentZoneURI		keyword
cef.extensions.originsicname		keyword
cef.extensions.outzone		keyword
cef.extensions.parent_rule		keyword
cef.extensions.priority		keyword
cef.extensions.product		keyword
cef.extensions.relevance		keyword
cef.extensions.repeatCount		keyword
cef.extensions.requestContext	Description of the content from which the request originated (for example, HTTP Referrer).	keyword
cef.extensions.requestMethod	The HTTP method used to access a URL.	keyword
cef.extensions.requestUrl	In the case of an HTTP request, this field contains the URL accessed. The URL should contain the protocol as well.	keyword
cef.extensions.requestUrlFileName		keyword
cef.extensions.rule_action		keyword
cef.extensions.rule_uid		keyword
cef.extensions.sequencenum		keyword
cef.extensions.service_id		keyword
cef.extensions.severity		keyword
cef.extensions.sourceAddress	Identifies the source that an event refers to in an IP network.	ip
cef.extensions.sourceGeoLatitude		long
cef.extensions.sourceGeoLongitude		long
cef.extensions.sourceHostName	Identifies the source that an event refers to in an IP network. The format should be a fully qualified domain name (FQDN) associated with the source node, when a mode is available.	keyword
cef.extensions.sourceMacAddress	Six colon-separated hexadecimal numbers.	keyword
cef.extensions.sourceNtDomain	The Windows domain name for the source address.	keyword
cef.extensions.sourcePort	The valid port numbers are 0 to 65535.	long
cef.extensions.sourceServiceName	The service that is responsible for generating this event.	keyword
cef.extensions.sourceTranslatedAddress	Identifies the translated source that the event refers to in an IP network.	ip
cef.extensions.sourceTranslatedPort	A port number after being translated by, for example, a firewall. Valid port numbers are 0 to 65535.	long
cef.extensions.sourceTranslatedZoneID		keyword
cef.extensions.sourceTranslatedZoneURI	The URI for the Translated Zone that the destination asset has been assigned to in ArcSight.	keyword
cef.extensions.sourceUserId	Identifies the source user by ID. This is the user associated with the source of the event. For example, in UNIX, the root user is generally associated with user ID 0.	keyword
cef.extensions.sourceUserName	Identifies the source user by name. Email addresses are also mapped into the UserName fields. The sender is a candidate to put into this field.	keyword
cef.extensions.sourceUserPrivileges	The typical values are "Administrator", "User", and "Guest". It identifies the source user's privileges. In UNIX, for example, activity executed by the root user would be identified with "Administrator".	keyword
cef.extensions.sourceZoneID	Identifies the source user by ID. This is the user associated with the source of the event. For example, in UNIX, the root user is generally associated with user ID 0.	keyword
cef.extensions.sourceZoneURI	The URI for the Zone that the source asset has been assigned to in ArcSight.	keyword
cef.extensions.startTime	The time when the activity the event referred to started. The format is MMM dd yyyy HH:mm:ss or milliseconds since epoch (Jan 1st 1970).	date
cef.extensions.target		keyword
cef.extensions.transportProtocol	Identifies the Layer-4 protocol used. The possible values are protocols such as TCP or UDP.	keyword
cef.extensions.type	0 means base event, 1 means aggregated, 2 means correlation, and 3 means action. This field can be omitted for base events (type 0).	long
cef.extensions.version		keyword
cef.forcepoint.virus_id	Virus ID	keyword
cef.name		keyword
cef.severity		keyword
cef.version		keyword
checkpoint.app_risk	Application risk.	keyword
checkpoint.app_severity	Application threat severity.	keyword
checkpoint.app_sig_id	The signature ID which the application was detected by.	keyword
checkpoint.auth_method	Password authentication protocol used.	keyword
checkpoint.category	Category.	keyword
checkpoint.confidence_level	Confidence level determined.	integer
checkpoint.connectivity_state	Connectivity state.	keyword
checkpoint.cookie	IKE cookie.	keyword
checkpoint.dst_phone_number	Destination IP-Phone.	keyword
checkpoint.email_control	Engine name.	keyword
checkpoint.email_id	Internal email ID.	keyword
checkpoint.email_recipients_num	Number of recipients.	long
checkpoint.email_session_id	Internal email session ID.	keyword
checkpoint.email_spool_id	Internal email spool ID.	keyword
checkpoint.email_subject	Email subject.	keyword
checkpoint.event_count	Number of events associated with the log.	long
checkpoint.frequency	Scan frequency.	keyword
checkpoint.icmp_code	ICMP code.	long
checkpoint.icmp_type	ICMP type.	long
checkpoint.identity_type	Identity type.	keyword
checkpoint.incident_extension	Format of original data.	keyword
checkpoint.integrity_av_invoke_type	Scan invoke type.	keyword
checkpoint.malware_family	Malware family.	keyword
checkpoint.peer_gateway	Main IP of the peer Security Gateway.	ip
checkpoint.performance_impact	Protection performance impact.	integer
checkpoint.protection_id	Protection malware ID.	keyword
checkpoint.protection_name	Specific signature name of the attack.	keyword
checkpoint.protection_type	Type of protection used to detect the attack.	keyword
checkpoint.scan_result	Scan result.	keyword
checkpoint.sensor_mode	Sensor mode.	keyword
checkpoint.severity	Threat severity.	keyword
checkpoint.spyware_name	Spyware name.	keyword
checkpoint.spyware_status	Spyware status.	keyword
checkpoint.subs_exp	The expiration date of the subscription.	date
checkpoint.tcp_flags	TCP packet flags.	keyword
checkpoint.termination_reason	Termination reason.	keyword
checkpoint.update_status	Update status.	keyword
checkpoint.user_status	User response.	keyword
checkpoint.uuid	External ID.	keyword
checkpoint.virus_name	Virus name.	keyword
checkpoint.voip_log_type	VoIP log types.	keyword
data_stream.dataset	Data stream dataset.	constant_keyword
data_stream.namespace	Data stream namespace.	constant_keyword
data_stream.type	Data stream type.	constant_keyword
destination.service.name		keyword
event.dataset	Event dataset	constant_keyword
event.module	Event module	constant_keyword
input.type	Type of Filebeat input.	keyword
log.file.path	Path to the log file.	keyword
log.flags	Flags for the log file.	keyword
log.offset	Offset of the entry in the log file.	long
log.source.address	Source address from which the log event was read / sent from.	keyword
source.service.name		keyword

Changelog

Version	Details	Kibana version(s)
2.17.1	Bug fix View pull request Add ignore_failure to the community_id processor in the ingest node pipeline.	8.6.1 or higher
2.17.0	Enhancement View pull request Update package spec to 3.0.3.	8.6.1 or higher
2.16.2	Enhancement View pull request Changed owners	8.6.1 or higher
2.16.1	Bug fix View pull request Fix exclude_files pattern.	8.6.1 or higher
2.16.0	Enhancement View pull request ECS version updated to 8.11.0.	8.6.1 or higher
2.15.0	Enhancement View pull request ECS version updated to 8.10.0.	8.6.1 or higher
2.14.0	Enhancement View pull request The format_version in the package manifest changed from 2.11.0 to 3.0.0. Removed dotted YAML keys from package manifest. Added 'owner.type: elastic' to package manifest.	8.6.1 or higher
2.13.0	Enhancement View pull request Add tags.yml file so that integration's dashboards and saved searches are tagged with "Security Solution" and displayed in the Security Solution UI.	8.6.1 or higher
2.12.0	Enhancement View pull request Update package to ECS 8.9.0.	8.6.1 or higher
2.11.0	Enhancement View pull request Ensure event.message is correctly set for pipeline errors.	8.6.1 or higher
2.10.0	Enhancement View pull request Update package to ECS 8.8.0.	8.6.1 or higher
2.9.0	Enhancement View pull request Update package-spec version to 2.7.0.	8.6.1 or higher
2.8.0	Enhancement View pull request Updating dashboards, adding TCP support and enabling ECS dynamic templates	8.6.1 or higher
2.7.0	Enhancement View pull request Update package to ECS 8.7.0.	8.1.0 or higher
2.6.2	Enhancement View pull request Added categories and/or subcategories.	8.1.0 or higher
2.6.1	Bug fix View pull request Ensure numeric timezones are correctly interpreted.	8.1.0 or higher
2.6.0	Enhancement View pull request Update package to ECS 8.6.0.	8.1.0 or higher
2.5.0	Enhancement View pull request Add `udp_options` to the UDP input.	8.1.0 or higher
2.4.1	Enhancement View pull request Migrate the visualizations to by value in dashboards to minimize the saved object clutter and reduce time to load	8.1.0 or higher
2.4.0	Enhancement View pull request Update package to ECS 8.5.0.	8.0.0 or higher
2.3.4	Bug fix View pull request Remove duplicate fields.	8.0.0 or higher
2.3.3	Bug fix View pull request Remove duplicate field.	8.0.0 or higher
2.3.2	Enhancement View pull request Use ECS geo.location definition.	8.0.0 or higher
2.3.1	Enhancement View pull request Remove unused visualizations	8.0.0 or higher
2.3.0	Enhancement View pull request Update package to ECS 8.4.0	8.0.0 or higher
2.2.1	Enhancement View pull request Update package name and description to align with standard wording	8.0.0 or higher
2.2.0	Enhancement View pull request Add generic CEF dashboards	8.0.0 or higher
2.1.0	Enhancement View pull request Update package to ECS 8.3.0.	8.0.0 or higher
2.0.3	Bug fix View pull request Format source.mac and destination.mac as per ECS.	8.0.0 or higher
2.0.2	Enhancement View pull request Improve field documentation	8.0.0 or higher
2.0.1	Bug fix View pull request Clarify scope of dashboards	—
2.0.0	Enhancement View pull request Migrate map visualisation from tile_map to map object	8.0.0 or higher
1.5.0	Enhancement View pull request Update to ECS 8.2 by modifying Check Point events to use the new email field set.	7.16.0 or higher 8.0.0 or higher
1.4.3	Enhancement View pull request Add documentation for multi-fields	7.16.0 or higher 8.0.0 or higher
1.4.2	Bug fix View pull request Add field mappings for several `event.*` fields.	7.16.0 or higher 8.0.0 or higher
1.4.1	Bug fix View pull request Append pipeline errors to error.message instead of overwriting existing errors.	—
1.4.0	Enhancement View pull request Update to ECS 8.0	7.16.0 or higher 8.0.0 or higher
1.3.1	Bug fix View pull request Regenerate test files using the new GeoIP database	7.16.0 or higher 8.0.0 or higher
1.3.0	Enhancement View pull request Change test IPs to the supported set for GeoIP Enhancement View pull request Add 8.0.0 version constraint	7.16.0 or higher 8.0.0 or higher
1.2.2	Enhancement View pull request Update Title and Description.	7.16.0 or higher
1.2.1	Bug fix View pull request Fix logic that checks for the 'forwarded' tag	—
1.2.0	Enhancement View pull request Add CEF time zone config option.	7.16.0 or higher
1.1.0	Enhancement View pull request Update to ECS 1.12.0	—
1.0.0	Enhancement View pull request make GA	—
0.5.2	Enhancement View pull request Convert to generated ECS fields	—
0.5.1	Enhancement View pull request update to ECS 1.11.0	—
0.5.0	Enhancement View pull request Update documentation to fit mdx spec	—
0.4.0	Enhancement View pull request Update integration description	—
0.3.0	Enhancement View pull request Set "event.module" and "event.dataset"	—
0.2.0	Enhancement View pull request update to ECS 1.10.0 and adding event.original options.	—
0.1.0	Enhancement View pull request Change syslog input to udp input. Add syslog timestamp parsing to Ingest Node pipeline.	—
0.0.4	Enhancement View pull request update to ECS 1.9.0	—
0.0.1	Enhancement View pull request initial release	—

On this page