You are viewing docs on Elastic's new documentation system, currently in technical preview. For all other Elastic docs, visit elastic.co/guide.

Network Packet Capture

Capture and analyze network traffic from a host with Elastic Agent.

Version
1.30.1 (View all)
Compatible Kibana version(s)
8.6.2 or higher
Supported Serverless project types

Security
Observability
Subscription level
Basic
Level of support
Elastic

This integration sniffs network packets on a host and dissects known protocols.

Monitoring your network traffic is critical to gaining observability and securing your environment — ensuring high levels of performance and security. The Network Packet Capture integration captures the network traffic between your application servers, decodes common application layer protocols and records the interesting fields for each transaction.

Supported Protocols

Currently, Network Packet Capture supports the following protocols:

  • ICMP (v4 and v6)
  • DHCP (v4)
  • DNS
  • HTTP
  • AMQP 0.9.1
  • Cassandra
  • Mysql
  • PostgreSQL
  • Redis
  • Thrift-RPC
  • MongoDB
  • Memcache
  • NFS
  • TLS
  • SIP/SDP (beta)

Common protocol options

The following options are available for all protocols:

map_to_ecs

Remap any non-ECS Packetbeat fields in root to their correct ECS fields. This will rename fields that are moved so the fields will not be present at the root of the document and so any rules that depend on the fields will need to be updated.

The legacy behaviour of this option is to not remap to ECS. This behaviour is still the default, but is deprecated and users are encouraged to set this option to true.

ECS remapping may have an impact on workflows that depend on the identity of non-ECS fields, and users should assess their use of these fields before making the change. Users who need to retain data collected with the legacy mappings may need to re-index their older documents. Instructions for doing this are available here. The pipeline used to perform ECS remapping for each data stream can be found in Stack Management›Ingest Pipelines and and searching for "logs-network_traffic compatibility".

The deprecation and retirement timeline for legacy behavior is available here.

enabled

The enabled setting is a boolean setting to enable or disable protocols without having to comment out configuration sections. If set to false, the protocol is disabled.

The default value is true.

ports

Exception: For ICMP the option enabled has to be used instead.

The ports where Network Packet Capture will look to capture traffic for specific protocols. Network Packet Capture installs a BPF filter based on the ports specified in this section. If a packet doesn’t match the filter, very little CPU is required to discard the packet. Network Packet Capture also uses the ports specified here to determine which parser to use for each packet.

monitor_processes

If this option is enabled then network traffic events will be enriched with information about the process associated with the events.

The default value is false.

send_request

If this option is enabled, the raw message of the request (request field) is sent to Elasticsearch. The default is false. This option is useful when you want to index the whole request. Note that for HTTP, the body is not included by default, only the HTTP headers.

send_response

If this option is enabled, the raw message of the response (response field) is sent to Elasticsearch. The default is false. This option is useful when you want to index the whole response. Note that for HTTP, the body is not included by default, only the HTTP headers.

transaction_timeout

The per protocol transaction timeout. Expired transactions will no longer be correlated to incoming responses, but sent to Elasticsearch immediately.

tags

A list of tags that will be sent with the transaction event. This setting is optional.

processors

A list of processors to apply to the data generated by the protocol.

keep_null

If this option is set to true, fields with null values will be published in the output document. By default, keep_null is set to false.

Network Flows

Overall flow information about the network connections on a host.

You can configure Network Packet Capture to collect and report statistics on network flows. A flow is a group of packets sent over the same time period that share common properties, such as the same source and destination address and protocol. You can use this feature to analyze network traffic over specific protocols on your network.

For each flow, Network Packet Capture reports the number of packets and the total number of bytes sent from the source to the destination. Each flow event also contains information about the source and destination hosts, such as their IP address. For bi-directional flows, Network Packet Capture reports statistics for the reverse flow.

Network Packet Capture collects and reports statistics up to and including the transport layer.

Configuration options

You can specify the following options for capturing flows.

enabled

Enables flows support if set to true. Set to false to disable network flows support without having to delete or comment out the flows section. The default value is true.

timeout

Timeout configures the lifetime of a flow. If no packets have been received for a flow within the timeout time window, the flow is killed and reported. The default value is 30s.

period

Configure the reporting interval. All flows are reported at the very same point in time. Periodical reporting can be disabled by setting the value to -1. If disabled, flows are still reported once being timed out. The default value is 10s.

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
client.bytes
Bytes sent from the client to the server.
long
client.geo.city_name
City name.
keyword
client.geo.continent_name
Name of the continent.
keyword
client.geo.country_iso_code
Country ISO code.
keyword
client.geo.country_name
Country name.
keyword
client.geo.location
Longitude and latitude.
geo_point
client.geo.region_iso_code
Region ISO code.
keyword
client.geo.region_name
Region name.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.process.args
The command-line of the process that initiated the transaction.
keyword
client.process.executable
Absolute path to the client process executable.
keyword
client.process.name
The name of the process that initiated the transaction.
keyword
client.process.start
The time the client process started.
date
client.process.working_directory
The working directory of the client process.
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.geo.city_name
City name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.mac
MAC address of the destination. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
destination.packets
Packets sent from the destination to the source.
long
destination.port
Port of the destination.
long
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Name of the dataset. If an event source publishes more than one type of log or events (e.g. access log, error log), the dataset is used to specify which one the event comes from. It's recommended but not required to start the dataset name with the module name, followed by a dot, then the dataset name.
keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
flow.id
Internal flow ID based on connection meta data and address.
keyword
flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.
keyword
host.hostname
Hostname of the host. It normally contains what the hostname command returns on the host machine.
keyword
host.id
Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name.
keyword
host.ip
Host ip addresses.
ip
host.mac
Host mac addresses.
keyword
host.name
Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.
keyword
host.os.build
OS build information.
keyword
host.os.codename
OS codename, if any.
keyword
host.os.family
OS family (such as redhat, debian, freebsd, windows).
keyword
host.os.kernel
Operating system kernel version as a raw string.
keyword
host.os.name
Operating system name, without the version.
keyword
host.os.name.text
Multi-field of host.os.name.
text
host.os.platform
Operating system platform (such centos, ubuntu, windows).
keyword
host.os.version
Operating system version as a raw string.
keyword
host.type
Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment.
keyword
method
The command/verb/method of the transaction. For HTTP, this is the method name (GET, POST, PUT, and so on), for SQL this is the verb (SELECT, UPDATE, DELETE, and so on).
keyword
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.community_id
A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.
keyword
network.direction
Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.
keyword
network.forwarded_ip
Host IP address when the source IP address is the proxy.
ip
network.packets
Total packets transferred in both directions. If source.packets and destination.packets are known, network.packets is their sum.
long
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
network.transport
Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.
keyword
network.type
In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.
keyword
network_traffic.flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
network_traffic.flow.id
Internal flow ID based on connection meta data and address.
keyword
network_traffic.flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
network_traffic.status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
observer.hostname
Hostname of the observer.
keyword
observer.ip
IP addresses of the observer.
ip
observer.mac
MAC addresses of the observer. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
params
The request parameters. For HTTP, these are the POST or GET parameters. For Thrift-RPC, these are the parameters from the request.
text
path
The path the transaction refers to. For HTTP, this is the URL. For SQL databases, this is the table name. For key-value stores, this is the key.
keyword
process.args
Array of process arguments, starting with the absolute path to the executable. May be filtered to protect sensitive information.
keyword
process.executable
Absolute path to the process executable.
keyword
process.executable.text
Multi-field of process.executable.
match_only_text
process.name
Process name. Sometimes called program name or similar.
keyword
process.name.text
Multi-field of process.name.
match_only_text
process.start
The time the process started.
date
process.working_directory
The working directory of the process.
keyword
process.working_directory.text
Multi-field of process.working_directory.
match_only_text
query
The query in a human readable format. For HTTP, it will typically be something like GET /users/_search?name=test. For MySQL, it is something like SELECT id from users where name=test.
keyword
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
request
For text protocols, this is the request as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
resource
The logical resource that this transaction refers to. For HTTP, this is the URL path up to the last slash (/). For example, if the URL is /users/1, the resource is /users. For databases, the resource is typically the table name. The field is not filled for all transaction types.
keyword
response
For text protocols, this is the response as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
server.bytes
Bytes sent from the server to the client.
long
server.geo.city_name
City name.
keyword
server.geo.continent_name
Name of the continent.
keyword
server.geo.country_iso_code
Country ISO code.
keyword
server.geo.country_name
Country name.
keyword
server.geo.location
Longitude and latitude.
geo_point
server.geo.region_iso_code
Region ISO code.
keyword
server.geo.region_name
Region name.
keyword
server.ip
IP address of the server (IPv4 or IPv6).
ip
server.port
Port of the server.
long
server.process.args
The command-line of the process that served the transaction.
keyword
server.process.executable
Absolute path to the server process executable.
keyword
server.process.name
The name of the process that served the transaction.
keyword
server.process.start
The time the server process started.
date
server.process.working_directory
The working directory of the server process.
keyword
source.bytes
Bytes sent from the source to the destination.
long
source.geo.city_name
City name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.mac
MAC address of the source. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
source.packets
Packets sent from the source to the destination.
long
source.port
Port of the source.
long
status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
tags
List of keywords used to tag each event.
keyword
type
The type of the transaction (for example, HTTP, MySQL, Redis, or RUM) or "flow" in case of flows.
keyword

An example event for flow looks as following:

{
    "@timestamp": "2023-10-16T22:40:20.005Z",
    "agent": {
        "ephemeral_id": "005dde79-7459-4b47-ae00-972086b4f5db",
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "name": "docker-fleet-agent",
        "type": "packetbeat",
        "version": "8.6.2"
    },
    "data_stream": {
        "dataset": "network_traffic.flow",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "bytes": 64,
        "ip": "::1",
        "packets": 1,
        "port": 8000
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "snapshot": false,
        "version": "8.6.2"
    },
    "event": {
        "action": "network_flow",
        "agent_id_status": "verified",
        "category": [
            "network"
        ],
        "dataset": "network_traffic.flow",
        "duration": 73561,
        "end": "2023-10-16T22:39:45.677Z",
        "ingested": "2023-10-16T22:40:21Z",
        "kind": "event",
        "start": "2023-10-16T22:39:45.677Z",
        "type": [
            "connection",
            "end"
        ]
    },
    "flow": {
        "final": true,
        "id": "QAT///////8A////IP8AAAEAAAAAAAAAAAAAAAAAAAABAAAAAAAAAAAAAAAAAAAAAUAfeMg"
    },
    "host": {
        "architecture": "x86_64",
        "containerized": false,
        "hostname": "docker-fleet-agent",
        "id": "f91b175388d443fca5c155815dfc2279",
        "ip": [
            "172.19.0.7"
        ],
        "mac": [
            "02-42-AC-13-00-07"
        ],
        "name": "docker-fleet-agent",
        "os": {
            "codename": "focal",
            "family": "debian",
            "kernel": "5.15.49-linuxkit",
            "name": "Ubuntu",
            "platform": "ubuntu",
            "type": "linux",
            "version": "20.04.5 LTS (Focal Fossa)"
        }
    },
    "network": {
        "bytes": 152,
        "community_id": "1:5y9AkdbV9U8xqD9dhlj6obkubHg=",
        "packets": 2,
        "transport": "tcp",
        "type": "ipv6"
    },
    "source": {
        "bytes": 88,
        "ip": "::1",
        "packets": 1,
        "port": 51320
    },
    "type": "flow"
}

Protocols

AMQP

Configuration options

Also see Common protocol options.

max_body_length

The maximum size in bytes of the message displayed in the request or response fields. Messages that are bigger than the specified size are truncated. Use this option to avoid publishing huge messages when send_request or send_response is enabled. The default is 1000 bytes.

parse_headers

If set to true, Network Packet Capture parses the additional arguments specified in the headers field of a message. Those arguments are key-value pairs that specify information such as the content type of the message or the message priority. The default is true.

parse_arguments

If set to true, Network Packet Capture parses the additional arguments specified in AMQP methods. Those arguments are key-value pairs specified by the user and can be of any length. The default is true.

hide_connection_information

If set to false, the connection layer methods of the protocol are also displayed, such as the opening and closing of connections and channels by clients, or the quality of service negotiation. The default is true.

Fields published for AMQP packets.

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
amqp.app-id
Creating application id.
keyword
amqp.arguments
Optional additional arguments passed to some methods. Can be of various types.
flattened
amqp.auto-delete
If set, auto-delete queue when unused.
boolean
amqp.class-id
Failing method class.
long
amqp.consumer-count
The number of consumers of a queue.
long
amqp.consumer-tag
Identifier for the consumer, valid within the current channel.
keyword
amqp.content-encoding
MIME content encoding.
keyword
amqp.content-type
MIME content type.
keyword
amqp.correlation-id
Application correlation identifier.
keyword
amqp.delivery-mode
Non-persistent (1) or persistent (2).
keyword
amqp.delivery-tag
The server-assigned and channel-specific delivery tag.
long
amqp.durable
If set, request a durable exchange/queue.
boolean
amqp.exchange
Name of the exchange.
keyword
amqp.exchange-type
Exchange type.
keyword
amqp.exclusive
If set, request an exclusive queue.
boolean
amqp.expiration
Message expiration specification.
keyword
amqp.headers
Message header field table.
object
amqp.if-empty
Delete only if empty.
boolean
amqp.if-unused
Delete only if unused.
boolean
amqp.immediate
Request immediate delivery.
boolean
amqp.mandatory
Indicates mandatory routing.
boolean
amqp.message-count
The number of messages in the queue, which will be zero for newly-declared queues.
long
amqp.message-id
Application message identifier.
keyword
amqp.method-id
Failing method ID.
long
amqp.multiple
Acknowledge multiple messages.
boolean
amqp.no-ack
If set, the server does not expect acknowledgements for messages.
boolean
amqp.no-local
If set, the server will not send messages to the connection that published them.
boolean
amqp.no-wait
If set, the server will not respond to the method.
boolean
amqp.passive
If set, do not create exchange/queue.
boolean
amqp.priority
Message priority, 0 to 9.
long
amqp.queue
The queue name identifies the queue within the vhost.
keyword
amqp.redelivered
Indicates that the message has been previously delivered to this or another client.
boolean
amqp.reply-code
AMQP reply code to an error, similar to http reply-code
long
amqp.reply-text
Text explaining the error.
keyword
amqp.reply-to
Address to reply to.
keyword
amqp.routing-key
Message routing key.
keyword
amqp.timestamp
Message timestamp.
keyword
amqp.type
Message type name.
keyword
amqp.user-id
Creating user id.
keyword
client.bytes
Bytes sent from the client to the server.
long
client.geo.city_name
City name.
keyword
client.geo.continent_name
Name of the continent.
keyword
client.geo.country_iso_code
Country ISO code.
keyword
client.geo.country_name
Country name.
keyword
client.geo.location
Longitude and latitude.
geo_point
client.geo.region_iso_code
Region ISO code.
keyword
client.geo.region_name
Region name.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.process.args
The command-line of the process that initiated the transaction.
keyword
client.process.executable
Absolute path to the client process executable.
keyword
client.process.name
The name of the process that initiated the transaction.
keyword
client.process.start
The time the client process started.
date
client.process.working_directory
The working directory of the client process.
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.geo.city_name
City name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.port
Port of the destination.
long
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.action
The action captured by the event. This describes the information in the event. It is more specific than event.category. Examples are group-add, process-started, file-created. The value is normally defined by the implementer.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Name of the dataset. If an event source publishes more than one type of log or events (e.g. access log, error log), the dataset is used to specify which one the event comes from. It's recommended but not required to start the dataset name with the module name, followed by a dot, then the dataset name.
keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
flow.id
Internal flow ID based on connection meta data and address.
keyword
flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.
keyword
host.hostname
Hostname of the host. It normally contains what the hostname command returns on the host machine.
keyword
host.id
Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name.
keyword
host.ip
Host ip addresses.
ip
host.mac
Host mac addresses.
keyword
host.name
Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.
keyword
host.os.build
OS build information.
keyword
host.os.codename
OS codename, if any.
keyword
host.os.family
OS family (such as redhat, debian, freebsd, windows).
keyword
host.os.kernel
Operating system kernel version as a raw string.
keyword
host.os.name
Operating system name, without the version.
keyword
host.os.name.text
Multi-field of host.os.name.
text
host.os.platform
Operating system platform (such centos, ubuntu, windows).
keyword
host.os.version
Operating system version as a raw string.
keyword
host.type
Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment.
keyword
method
The command/verb/method of the transaction. For HTTP, this is the method name (GET, POST, PUT, and so on), for SQL this is the verb (SELECT, UPDATE, DELETE, and so on).
keyword
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.community_id
A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.
keyword
network.direction
Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.
keyword
network.forwarded_ip
Host IP address when the source IP address is the proxy.
ip
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
network.transport
Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.
keyword
network.type
In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.
keyword
network_traffic.amqp.app-id
Creating application id.
keyword
network_traffic.amqp.arguments
Optional additional arguments passed to some methods. Can be of various types.
flattened
network_traffic.amqp.auto-delete
If set, auto-delete queue when unused.
boolean
network_traffic.amqp.class-id
Failing method class.
long
network_traffic.amqp.consumer-count
The number of consumers of a queue.
long
network_traffic.amqp.consumer-tag
Identifier for the consumer, valid within the current channel.
keyword
network_traffic.amqp.content-encoding
MIME content encoding.
keyword
network_traffic.amqp.content-type
MIME content type.
keyword
network_traffic.amqp.correlation-id
Application correlation identifier.
keyword
network_traffic.amqp.delivery-mode
Non-persistent (1) or persistent (2).
keyword
network_traffic.amqp.delivery-tag
The server-assigned and channel-specific delivery tag.
long
network_traffic.amqp.durable
If set, request a durable exchange/queue.
boolean
network_traffic.amqp.exchange
Name of the exchange.
keyword
network_traffic.amqp.exchange-type
Exchange type.
keyword
network_traffic.amqp.exclusive
If set, request an exclusive queue.
boolean
network_traffic.amqp.expiration
Message expiration specification.
keyword
network_traffic.amqp.headers
Message header field table.
object
network_traffic.amqp.if-empty
Delete only if empty.
boolean
network_traffic.amqp.if-unused
Delete only if unused.
boolean
network_traffic.amqp.immediate
Request immediate delivery.
boolean
network_traffic.amqp.mandatory
Indicates mandatory routing.
boolean
network_traffic.amqp.message-count
The number of messages in the queue, which will be zero for newly-declared queues.
long
network_traffic.amqp.message-id
Application message identifier.
keyword
network_traffic.amqp.method
The command/verb/method of the transaction. For HTTP, this is the method name (GET, POST, PUT, and so on), for SQL this is the verb (SELECT, UPDATE, DELETE, and so on).
keyword
network_traffic.amqp.method-id
Failing method ID.
long
network_traffic.amqp.multiple
Acknowledge multiple messages.
boolean
network_traffic.amqp.no-ack
If set, the server does not expect acknowledgements for messages.
boolean
network_traffic.amqp.no-local
If set, the server will not send messages to the connection that published them.
boolean
network_traffic.amqp.no-wait
If set, the server will not respond to the method.
boolean
network_traffic.amqp.passive
If set, do not create exchange/queue.
boolean
network_traffic.amqp.priority
Message priority, 0 to 9.
long
network_traffic.amqp.queue
The queue name identifies the queue within the vhost.
keyword
network_traffic.amqp.redelivered
Indicates that the message has been previously delivered to this or another client.
boolean
network_traffic.amqp.reply-code
AMQP reply code to an error, similar to http reply-code
long
network_traffic.amqp.reply-text
Text explaining the error.
keyword
network_traffic.amqp.reply-to
Address to reply to.
keyword
network_traffic.amqp.routing-key
Message routing key.
keyword
network_traffic.amqp.timestamp
Message timestamp.
keyword
network_traffic.amqp.type
Message type name.
keyword
network_traffic.amqp.user-id
Creating user id.
keyword
network_traffic.status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
observer.hostname
Hostname of the observer.
keyword
observer.ip
IP addresses of the observer.
ip
observer.mac
MAC addresses of the observer. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
params
The request parameters. For HTTP, these are the POST or GET parameters. For Thrift-RPC, these are the parameters from the request.
text
path
The path the transaction refers to. For HTTP, this is the URL. For SQL databases, this is the table name. For key-value stores, this is the key.
keyword
process.args
Array of process arguments, starting with the absolute path to the executable. May be filtered to protect sensitive information.
keyword
process.executable
Absolute path to the process executable.
keyword
process.executable.text
Multi-field of process.executable.
match_only_text
process.name
Process name. Sometimes called program name or similar.
keyword
process.name.text
Multi-field of process.name.
match_only_text
process.start
The time the process started.
date
process.working_directory
The working directory of the process.
keyword
process.working_directory.text
Multi-field of process.working_directory.
match_only_text
query
The query in a human readable format. For HTTP, it will typically be something like GET /users/_search?name=test. For MySQL, it is something like SELECT id from users where name=test.
keyword
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
request
For text protocols, this is the request as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
resource
The logical resource that this transaction refers to. For HTTP, this is the URL path up to the last slash (/). For example, if the URL is /users/1, the resource is /users. For databases, the resource is typically the table name. The field is not filled for all transaction types.
keyword
response
For text protocols, this is the response as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
server.bytes
Bytes sent from the server to the client.
long
server.geo.city_name
City name.
keyword
server.geo.continent_name
Name of the continent.
keyword
server.geo.country_iso_code
Country ISO code.
keyword
server.geo.country_name
Country name.
keyword
server.geo.location
Longitude and latitude.
geo_point
server.geo.region_iso_code
Region ISO code.
keyword
server.geo.region_name
Region name.
keyword
server.ip
IP address of the server (IPv4 or IPv6).
ip
server.port
Port of the server.
long
server.process.args
The command-line of the process that served the transaction.
keyword
server.process.executable
Absolute path to the server process executable.
keyword
server.process.name
The name of the process that served the transaction.
keyword
server.process.start
The time the server process started.
date
server.process.working_directory
The working directory of the server process.
keyword
source.bytes
Bytes sent from the source to the destination.
long
source.geo.city_name
City name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.port
Port of the source.
long
status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
tags
List of keywords used to tag each event.
keyword
type
The type of the transaction (for example, HTTP, MySQL, Redis, or RUM) or "flow" in case of flows.
keyword

An example event for amqp looks as following:

{
    "@timestamp": "2023-10-16T22:25:39.072Z",
    "agent": {
        "ephemeral_id": "0749f3ad-7bc9-4e3a-9ffc-90eaefc86763",
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "name": "docker-fleet-agent",
        "type": "packetbeat",
        "version": "8.6.2"
    },
    "amqp": {
        "auto-delete": false,
        "consumer-count": 0,
        "durable": false,
        "exclusive": false,
        "message-count": 0,
        "no-wait": false,
        "passive": false,
        "queue": "hello"
    },
    "client": {
        "bytes": 25,
        "ip": "127.0.0.1",
        "port": 34222
    },
    "data_stream": {
        "dataset": "network_traffic.amqp",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "bytes": 26,
        "ip": "127.0.0.1",
        "port": 5672
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "snapshot": false,
        "version": "8.6.2"
    },
    "event": {
        "action": "amqp.queue.declare",
        "agent_id_status": "verified",
        "category": [
            "network"
        ],
        "dataset": "network_traffic.amqp",
        "duration": 1265764,
        "end": "2023-10-16T22:25:39.073Z",
        "ingested": "2023-10-16T22:25:40Z",
        "kind": "event",
        "start": "2023-10-16T22:25:39.072Z",
        "type": [
            "connection",
            "protocol"
        ]
    },
    "host": {
        "architecture": "x86_64",
        "containerized": false,
        "hostname": "docker-fleet-agent",
        "id": "f91b175388d443fca5c155815dfc2279",
        "ip": [
            "172.19.0.7"
        ],
        "mac": [
            "02-42-AC-13-00-07"
        ],
        "name": "docker-fleet-agent",
        "os": {
            "codename": "focal",
            "family": "debian",
            "kernel": "5.15.49-linuxkit",
            "name": "Ubuntu",
            "platform": "ubuntu",
            "type": "linux",
            "version": "20.04.5 LTS (Focal Fossa)"
        }
    },
    "method": "queue.declare",
    "network": {
        "bytes": 51,
        "community_id": "1:i6J4zz0FGnZMYLIy8kabND2W/XE=",
        "direction": "ingress",
        "protocol": "amqp",
        "transport": "tcp",
        "type": "ipv4"
    },
    "related": {
        "ip": [
            "127.0.0.1"
        ]
    },
    "server": {
        "bytes": 26,
        "ip": "127.0.0.1",
        "port": 5672
    },
    "source": {
        "bytes": 25,
        "ip": "127.0.0.1",
        "port": 34222
    },
    "status": "OK",
    "type": "amqp"
}

Cassandra

Configuration options

Also see Common protocol options.

send_request_header

If this option is enabled, the raw message of the response (cassandra_request.request_headers field) is sent to Elasticsearch. The default is true. Enable send_request first before enabling this option.

send_response_header

If this option is enabled, the raw message of the response (cassandra_response.response_headers field) is included in published events. The default is true. enable send_response first before enable this option.

ignored_ops

This option indicates which Operator/Operators captured will be ignored. currently support: ERROR ,STARTUP ,READY ,AUTHENTICATE ,OPTIONS ,SUPPORTED , QUERY ,RESULT ,PREPARE ,EXECUTE ,REGISTER ,EVENT , BATCH ,AUTH_CHALLENGE,AUTH_RESPONSE ,AUTH_SUCCESS .

compressor

Configures the default compression algorithm being used to uncompress compressed frames by name. Currently only snappy is can be configured. By default no compressor is configured.

Fields published for Apache Cassandra packets.

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
cassandra.no_request
Indicates that there is no request because this is a PUSH message.
boolean
cassandra.request.headers.flags
Flags applying to this frame.
keyword
cassandra.request.headers.length
A integer representing the length of the body of the frame (a frame is limited to 256MB in length).
long
cassandra.request.headers.op
An operation type that distinguishes the actual message.
keyword
cassandra.request.headers.stream
A frame has a stream id. If a client sends a request message with the stream id X, it is guaranteed that the stream id of the response to that message will be X.
keyword
cassandra.request.headers.version
The version of the protocol.
keyword
cassandra.request.query
The CQL query which client send to cassandra.
keyword
cassandra.response.authentication.class
Indicates the full class name of the IAuthenticator in use
keyword
cassandra.response.error.code
The error code of the Cassandra response.
long
cassandra.response.error.details.alive
Representing the number of replicas that were known to be alive when the request had been processed (since an unavailable exception has been triggered).
long
cassandra.response.error.details.arg_types
One string for each argument type (as CQL type) of the failed function.
keyword
cassandra.response.error.details.blockfor
Representing the number of replicas whose acknowledgement is required to achieve consistency level.
long
cassandra.response.error.details.data_present
It means the replica that was asked for data had responded.
boolean
cassandra.response.error.details.function
The name of the failed function.
keyword
cassandra.response.error.details.keyspace
The keyspace of the failed function.
keyword
cassandra.response.error.details.num_failures
Representing the number of nodes that experience a failure while executing the request.
keyword
cassandra.response.error.details.read_consistency
Representing the consistency level of the query that triggered the exception.
keyword
cassandra.response.error.details.received
Representing the number of nodes having acknowledged the request.
long
cassandra.response.error.details.required
Representing the number of nodes that should be alive to respect consistency level.
long
cassandra.response.error.details.stmt_id
Representing the unknown ID.
keyword
cassandra.response.error.details.table
The keyspace of the failed function.
keyword
cassandra.response.error.details.write_type
Describe the type of the write that timed out.
keyword
cassandra.response.error.msg
The error message of the Cassandra response.
keyword
cassandra.response.error.type
The error type of the Cassandra response.
keyword
cassandra.response.event.change
The message corresponding respectively to the type of change followed by the address of the new/removed node.
keyword
cassandra.response.event.host
Representing the node ip.
keyword
cassandra.response.event.port
Representing the node port.
long
cassandra.response.event.schema_change.args
One string for each argument type (as CQL type).
keyword
cassandra.response.event.schema_change.change
Representing the type of changed involved.
keyword
cassandra.response.event.schema_change.keyspace
This describes which keyspace has changed.
keyword
cassandra.response.event.schema_change.name
The function/aggregate name.
keyword
cassandra.response.event.schema_change.object
This describes the name of said affected object (either the table, user type, function, or aggregate name).
keyword
cassandra.response.event.schema_change.table
This describes which table has changed.
keyword
cassandra.response.event.schema_change.target
Target could be "FUNCTION" or "AGGREGATE", multiple arguments.
keyword
cassandra.response.event.type
Representing the event type.
keyword
cassandra.response.headers.flags
Flags applying to this frame.
keyword
cassandra.response.headers.length
A integer representing the length of the body of the frame (a frame is limited to 256MB in length).
long
cassandra.response.headers.op
An operation type that distinguishes the actual message.
keyword
cassandra.response.headers.stream
A frame has a stream id. If a client sends a request message with the stream id X, it is guaranteed that the stream id of the response to that message will be X.
keyword
cassandra.response.headers.version
The version of the protocol.
keyword
cassandra.response.result.keyspace
Indicating the name of the keyspace that has been set.
keyword
cassandra.response.result.prepared.prepared_id
Representing the prepared query ID.
keyword
cassandra.response.result.prepared.req_meta.col_count
Representing the number of columns selected by the query that produced this result.
long
cassandra.response.result.prepared.req_meta.flags
Provides information on the formatting of the remaining information.
keyword
cassandra.response.result.prepared.req_meta.keyspace
Only present after set Global_tables_spec, the keyspace name.
keyword
cassandra.response.result.prepared.req_meta.paging_state
The paging_state is a bytes value that should be used in QUERY/EXECUTE to continue paging and retrieve the remainder of the result for this query.
keyword
cassandra.response.result.prepared.req_meta.pkey_columns
Representing the PK columns index and counts.
long
cassandra.response.result.prepared.req_meta.table
Only present after set Global_tables_spec, the table name.
keyword
cassandra.response.result.prepared.resp_meta.col_count
Representing the number of columns selected by the query that produced this result.
long
cassandra.response.result.prepared.resp_meta.flags
Provides information on the formatting of the remaining information.
keyword
cassandra.response.result.prepared.resp_meta.keyspace
Only present after set Global_tables_spec, the keyspace name.
keyword
cassandra.response.result.prepared.resp_meta.paging_state
The paging_state is a bytes value that should be used in QUERY/EXECUTE to continue paging and retrieve the remainder of the result for this query.
keyword
cassandra.response.result.prepared.resp_meta.pkey_columns
Representing the PK columns index and counts.
long
cassandra.response.result.prepared.resp_meta.table
Only present after set Global_tables_spec, the table name.
keyword
cassandra.response.result.rows.meta.col_count
Representing the number of columns selected by the query that produced this result.
long
cassandra.response.result.rows.meta.flags
Provides information on the formatting of the remaining information.
keyword
cassandra.response.result.rows.meta.keyspace
Only present after set Global_tables_spec, the keyspace name.
keyword
cassandra.response.result.rows.meta.paging_state
The paging_state is a bytes value that should be used in QUERY/EXECUTE to continue paging and retrieve the remainder of the result for this query.
keyword
cassandra.response.result.rows.meta.pkey_columns
Representing the PK columns index and counts.
long
cassandra.response.result.rows.meta.table
Only present after set Global_tables_spec, the table name.
keyword
cassandra.response.result.rows.num_rows
Representing the number of rows present in this result.
long
cassandra.response.result.schema_change.args
One string for each argument type (as CQL type).
keyword
cassandra.response.result.schema_change.change
Representing the type of changed involved.
keyword
cassandra.response.result.schema_change.keyspace
This describes which keyspace has changed.
keyword
cassandra.response.result.schema_change.name
The function/aggregate name.
keyword
cassandra.response.result.schema_change.object
This describes the name of said affected object (either the table, user type, function, or aggregate name).
keyword
cassandra.response.result.schema_change.table
This describes which table has changed.
keyword
cassandra.response.result.schema_change.target
Target could be "FUNCTION" or "AGGREGATE", multiple arguments.
keyword
cassandra.response.result.type
Cassandra result type.
keyword
cassandra.response.supported
Indicates which startup options are supported by the server. This message comes as a response to an OPTIONS message.
flattened
cassandra.response.warnings
The text of the warnings, only occur when Warning flag was set.
keyword
client.bytes
Bytes sent from the client to the server.
long
client.geo.city_name
City name.
keyword
client.geo.continent_name
Name of the continent.
keyword
client.geo.country_iso_code
Country ISO code.
keyword
client.geo.country_name
Country name.
keyword
client.geo.location
Longitude and latitude.
geo_point
client.geo.region_iso_code
Region ISO code.
keyword
client.geo.region_name
Region name.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.process.args
The command-line of the process that initiated the transaction.
keyword
client.process.executable
Absolute path to the client process executable.
keyword
client.process.name
The name of the process that initiated the transaction.
keyword
client.process.start
The time the client process started.
date
client.process.working_directory
The working directory of the client process.
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.geo.city_name
City name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.port
Port of the destination.
long
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Name of the dataset. If an event source publishes more than one type of log or events (e.g. access log, error log), the dataset is used to specify which one the event comes from. It's recommended but not required to start the dataset name with the module name, followed by a dot, then the dataset name.
keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
flow.id
Internal flow ID based on connection meta data and address.
keyword
flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.
keyword
host.hostname
Hostname of the host. It normally contains what the hostname command returns on the host machine.
keyword
host.id
Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name.
keyword
host.ip
Host ip addresses.
ip
host.mac
Host mac addresses.
keyword
host.name
Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.
keyword
host.os.build
OS build information.
keyword
host.os.codename
OS codename, if any.
keyword
host.os.family
OS family (such as redhat, debian, freebsd, windows).
keyword
host.os.kernel
Operating system kernel version as a raw string.
keyword
host.os.name
Operating system name, without the version.
keyword
host.os.name.text
Multi-field of host.os.name.
text
host.os.platform
Operating system platform (such centos, ubuntu, windows).
keyword
host.os.version
Operating system version as a raw string.
keyword
host.type
Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment.
keyword
method
The command/verb/method of the transaction. For HTTP, this is the method name (GET, POST, PUT, and so on), for SQL this is the verb (SELECT, UPDATE, DELETE, and so on).
keyword
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.community_id
A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.
keyword
network.direction
Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.
keyword
network.forwarded_ip
Host IP address when the source IP address is the proxy.
ip
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
network.transport
Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.
keyword
network.type
In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.
keyword
network_traffic.cassandra.no_request
Indicates that there is no request because this is a PUSH message.
boolean
network_traffic.cassandra.request.headers.flags
Flags applying to this frame.
keyword
network_traffic.cassandra.request.headers.length
A integer representing the length of the body of the frame (a frame is limited to 256MB in length).
long
network_traffic.cassandra.request.headers.op
An operation type that distinguishes the actual message.
keyword
network_traffic.cassandra.request.headers.stream
A frame has a stream id. If a client sends a request message with the stream id X, it is guaranteed that the stream id of the response to that message will be X.
keyword
network_traffic.cassandra.request.headers.version
The version of the protocol.
keyword
network_traffic.cassandra.request.query
The CQL query which client send to cassandra.
keyword
network_traffic.cassandra.response.authentication.class
Indicates the full class name of the IAuthenticator in use
keyword
network_traffic.cassandra.response.error.code
The error code of the Cassandra response.
long
network_traffic.cassandra.response.error.details.alive
Representing the number of replicas that were known to be alive when the request had been processed (since an unavailable exception has been triggered).
long
network_traffic.cassandra.response.error.details.arg_types
One string for each argument type (as CQL type) of the failed function.
keyword
network_traffic.cassandra.response.error.details.blockfor
Representing the number of replicas whose acknowledgement is required to achieve consistency level.
long
network_traffic.cassandra.response.error.details.data_present
It means the replica that was asked for data had responded.
boolean
network_traffic.cassandra.response.error.details.function
The name of the failed function.
keyword
network_traffic.cassandra.response.error.details.keyspace
The keyspace of the failed function.
keyword
network_traffic.cassandra.response.error.details.num_failures
Representing the number of nodes that experience a failure while executing the request.
keyword
network_traffic.cassandra.response.error.details.read_consistency
Representing the consistency level of the query that triggered the exception.
keyword
network_traffic.cassandra.response.error.details.received
Representing the number of nodes having acknowledged the request.
long
network_traffic.cassandra.response.error.details.required
Representing the number of nodes that should be alive to respect consistency level.
long
network_traffic.cassandra.response.error.details.stmt_id
Representing the unknown ID.
keyword
network_traffic.cassandra.response.error.details.table
The keyspace of the failed function.
keyword
network_traffic.cassandra.response.error.details.write_type
Describe the type of the write that timed out.
keyword
network_traffic.cassandra.response.error.msg
The error message of the Cassandra response.
keyword
network_traffic.cassandra.response.error.type
The error type of the Cassandra response.
keyword
network_traffic.cassandra.response.event.change
The message corresponding respectively to the type of change followed by the address of the new/removed node.
keyword
network_traffic.cassandra.response.event.host
Representing the node ip.
keyword
network_traffic.cassandra.response.event.port
Representing the node port.
long
network_traffic.cassandra.response.event.schema_change.args
One string for each argument type (as CQL type).
keyword
network_traffic.cassandra.response.event.schema_change.change
Representing the type of changed involved.
keyword
network_traffic.cassandra.response.event.schema_change.keyspace
This describes which keyspace has changed.
keyword
network_traffic.cassandra.response.event.schema_change.name
The function/aggregate name.
keyword
network_traffic.cassandra.response.event.schema_change.object
This describes the name of said affected object (either the table, user type, function, or aggregate name).
keyword
network_traffic.cassandra.response.event.schema_change.table
This describes which table has changed.
keyword
network_traffic.cassandra.response.event.schema_change.target
Target could be "FUNCTION" or "AGGREGATE", multiple arguments.
keyword
network_traffic.cassandra.response.event.type
Representing the event type.
keyword
network_traffic.cassandra.response.headers.flags
Flags applying to this frame.
keyword
network_traffic.cassandra.response.headers.length
A integer representing the length of the body of the frame (a frame is limited to 256MB in length).
long
network_traffic.cassandra.response.headers.op
An operation type that distinguishes the actual message.
keyword
network_traffic.cassandra.response.headers.stream
A frame has a stream id. If a client sends a request message with the stream id X, it is guaranteed that the stream id of the response to that message will be X.
keyword
network_traffic.cassandra.response.headers.version
The version of the protocol.
keyword
network_traffic.cassandra.response.result.keyspace
Indicating the name of the keyspace that has been set.
keyword
network_traffic.cassandra.response.result.prepared.prepared_id
Representing the prepared query ID.
keyword
network_traffic.cassandra.response.result.prepared.req_meta.col_count
Representing the number of columns selected by the query that produced this result.
long
network_traffic.cassandra.response.result.prepared.req_meta.flags
Provides information on the formatting of the remaining information.
keyword
network_traffic.cassandra.response.result.prepared.req_meta.keyspace
Only present after set Global_tables_spec, the keyspace name.
keyword
network_traffic.cassandra.response.result.prepared.req_meta.paging_state
The paging_state is a bytes value that should be used in QUERY/EXECUTE to continue paging and retrieve the remainder of the result for this query.
keyword
network_traffic.cassandra.response.result.prepared.req_meta.pkey_columns
Representing the PK columns index and counts.
long
network_traffic.cassandra.response.result.prepared.req_meta.table
Only present after set Global_tables_spec, the table name.
keyword
network_traffic.cassandra.response.result.prepared.resp_meta.col_count
Representing the number of columns selected by the query that produced this result.
long
network_traffic.cassandra.response.result.prepared.resp_meta.flags
Provides information on the formatting of the remaining information.
keyword
network_traffic.cassandra.response.result.prepared.resp_meta.keyspace
Only present after set Global_tables_spec, the keyspace name.
keyword
network_traffic.cassandra.response.result.prepared.resp_meta.paging_state
The paging_state is a bytes value that should be used in QUERY/EXECUTE to continue paging and retrieve the remainder of the result for this query.
keyword
network_traffic.cassandra.response.result.prepared.resp_meta.pkey_columns
Representing the PK columns index and counts.
long
network_traffic.cassandra.response.result.prepared.resp_meta.table
Only present after set Global_tables_spec, the table name.
keyword
network_traffic.cassandra.response.result.rows.meta.col_count
Representing the number of columns selected by the query that produced this result.
long
network_traffic.cassandra.response.result.rows.meta.flags
Provides information on the formatting of the remaining information.
keyword
network_traffic.cassandra.response.result.rows.meta.keyspace
Only present after set Global_tables_spec, the keyspace name.
keyword
network_traffic.cassandra.response.result.rows.meta.paging_state
The paging_state is a bytes value that should be used in QUERY/EXECUTE to continue paging and retrieve the remainder of the result for this query.
keyword
network_traffic.cassandra.response.result.rows.meta.pkey_columns
Representing the PK columns index and counts.
long
network_traffic.cassandra.response.result.rows.meta.table
Only present after set Global_tables_spec, the table name.
keyword
network_traffic.cassandra.response.result.rows.num_rows
Representing the number of rows present in this result.
long
network_traffic.cassandra.response.result.schema_change.args
One string for each argument type (as CQL type).
keyword
network_traffic.cassandra.response.result.schema_change.change
Representing the type of changed involved.
keyword
network_traffic.cassandra.response.result.schema_change.keyspace
This describes which keyspace has changed.
keyword
network_traffic.cassandra.response.result.schema_change.name
The function/aggregate name.
keyword
network_traffic.cassandra.response.result.schema_change.object
This describes the name of said affected object (either the table, user type, function, or aggregate name).
keyword
network_traffic.cassandra.response.result.schema_change.table
This describes which table has changed.
keyword
network_traffic.cassandra.response.result.schema_change.target
Target could be "FUNCTION" or "AGGREGATE", multiple arguments.
keyword
network_traffic.cassandra.response.result.type
Cassandra result type.
keyword
network_traffic.cassandra.response.supported
Indicates which startup options are supported by the server. This message comes as a response to an OPTIONS message.
flattened
network_traffic.cassandra.response.warnings
The text of the warnings, only occur when Warning flag was set.
keyword
network_traffic.status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
observer.hostname
Hostname of the observer.
keyword
observer.ip
IP addresses of the observer.
ip
observer.mac
MAC addresses of the observer. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
params
The request parameters. For HTTP, these are the POST or GET parameters. For Thrift-RPC, these are the parameters from the request.
text
path
The path the transaction refers to. For HTTP, this is the URL. For SQL databases, this is the table name. For key-value stores, this is the key.
keyword
process.args
Array of process arguments, starting with the absolute path to the executable. May be filtered to protect sensitive information.
keyword
process.executable
Absolute path to the process executable.
keyword
process.executable.text
Multi-field of process.executable.
match_only_text
process.name
Process name. Sometimes called program name or similar.
keyword
process.name.text
Multi-field of process.name.
match_only_text
process.start
The time the process started.
date
process.working_directory
The working directory of the process.
keyword
process.working_directory.text
Multi-field of process.working_directory.
match_only_text
query
The query in a human readable format. For HTTP, it will typically be something like GET /users/_search?name=test. For MySQL, it is something like SELECT id from users where name=test.
keyword
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
request
For text protocols, this is the request as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
resource
The logical resource that this transaction refers to. For HTTP, this is the URL path up to the last slash (/). For example, if the URL is /users/1, the resource is /users. For databases, the resource is typically the table name. The field is not filled for all transaction types.
keyword
response
For text protocols, this is the response as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
server.bytes
Bytes sent from the server to the client.
long
server.geo.city_name
City name.
keyword
server.geo.continent_name
Name of the continent.
keyword
server.geo.country_iso_code
Country ISO code.
keyword
server.geo.country_name
Country name.
keyword
server.geo.location
Longitude and latitude.
geo_point
server.geo.region_iso_code
Region ISO code.
keyword
server.geo.region_name
Region name.
keyword
server.ip
IP address of the server (IPv4 or IPv6).
ip
server.port
Port of the server.
long
server.process.args
The command-line of the process that served the transaction.
keyword
server.process.executable
Absolute path to the server process executable.
keyword
server.process.name
The name of the process that served the transaction.
keyword
server.process.start
The time the server process started.
date
server.process.working_directory
The working directory of the server process.
keyword
source.bytes
Bytes sent from the source to the destination.
long
source.geo.city_name
City name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.port
Port of the source.
long
status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
tags
List of keywords used to tag each event.
keyword
type
The type of the transaction (for example, HTTP, MySQL, Redis, or RUM) or "flow" in case of flows.
keyword

An example event for cassandra looks as following:

{
    "@timestamp": "2023-10-16T22:31:00.694Z",
    "agent": {
        "ephemeral_id": "c013fddf-67ee-4638-8676-393fc70318cc",
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "name": "docker-fleet-agent",
        "type": "packetbeat",
        "version": "8.6.2"
    },
    "cassandra": {
        "request": {
            "headers": {
                "flags": "Default",
                "length": 98,
                "op": "QUERY",
                "stream": 49,
                "version": "4"
            },
            "query": "CREATE TABLE users (\n  user_id int PRIMARY KEY,\n  fname text,\n  lname text\n);"
        },
        "response": {
            "headers": {
                "flags": "Default",
                "length": 39,
                "op": "RESULT",
                "stream": 49,
                "version": "4"
            },
            "result": {
                "schema_change": {
                    "change": "CREATED",
                    "keyspace": "mykeyspace",
                    "object": "users",
                    "target": "TABLE"
                },
                "type": "schemaChanged"
            }
        }
    },
    "client": {
        "bytes": 107,
        "ip": "127.0.0.1",
        "port": 52749
    },
    "data_stream": {
        "dataset": "network_traffic.cassandra",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "bytes": 48,
        "ip": "127.0.0.1",
        "port": 9042
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "snapshot": false,
        "version": "8.6.2"
    },
    "event": {
        "agent_id_status": "verified",
        "category": [
            "network"
        ],
        "dataset": "network_traffic.cassandra",
        "duration": 131789052,
        "end": "2023-10-16T22:31:00.826Z",
        "ingested": "2023-10-16T22:31:04Z",
        "kind": "event",
        "start": "2023-10-16T22:31:00.694Z",
        "type": [
            "connection",
            "protocol"
        ]
    },
    "host": {
        "architecture": "x86_64",
        "containerized": false,
        "hostname": "docker-fleet-agent",
        "id": "f91b175388d443fca5c155815dfc2279",
        "ip": [
            "172.19.0.7"
        ],
        "mac": [
            "02-42-AC-13-00-07"
        ],
        "name": "docker-fleet-agent",
        "os": {
            "codename": "focal",
            "family": "debian",
            "kernel": "5.15.49-linuxkit",
            "name": "Ubuntu",
            "platform": "ubuntu",
            "type": "linux",
            "version": "20.04.5 LTS (Focal Fossa)"
        }
    },
    "network": {
        "bytes": 155,
        "community_id": "1:bCORHZnGIk6GWYaE3Kn0DOpQCKE=",
        "direction": "ingress",
        "protocol": "cassandra",
        "transport": "tcp",
        "type": "ipv4"
    },
    "related": {
        "ip": [
            "127.0.0.1"
        ]
    },
    "server": {
        "bytes": 48,
        "ip": "127.0.0.1",
        "port": 9042
    },
    "source": {
        "bytes": 107,
        "ip": "127.0.0.1",
        "port": 52749
    },
    "status": "OK",
    "type": "cassandra"
}

DHCP

Configuration options

See Common protocol options.

Fields published for DHCPv4 packets.

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
client.bytes
Bytes sent from the client to the server.
long
client.geo.city_name
City name.
keyword
client.geo.continent_name
Name of the continent.
keyword
client.geo.country_iso_code
Country ISO code.
keyword
client.geo.country_name
Country name.
keyword
client.geo.location
Longitude and latitude.
geo_point
client.geo.region_iso_code
Region ISO code.
keyword
client.geo.region_name
Region name.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.process.args
The command-line of the process that initiated the transaction.
keyword
client.process.executable
Absolute path to the client process executable.
keyword
client.process.name
The name of the process that initiated the transaction.
keyword
client.process.start
The time the client process started.
date
client.process.working_directory
The working directory of the client process.
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.geo.city_name
City name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.port
Port of the destination.
long
dhcpv4.assigned_ip
The IP address that the DHCP server is assigning to the client. This field is also known as "your" IP address.
ip
dhcpv4.client_ip
The current IP address of the client.
ip
dhcpv4.client_mac
The client's MAC address (layer two).
keyword
dhcpv4.flags
Flags are set by the client to indicate how the DHCP server should its reply -- either unicast or broadcast.
keyword
dhcpv4.hardware_type
The type of hardware used for the local network (Ethernet, LocalTalk, etc).
keyword
dhcpv4.hops
The number of hops the DHCP message went through.
long
dhcpv4.op_code
The message op code (bootrequest or bootreply).
keyword
dhcpv4.option.boot_file_name
This option is used to identify a bootfile when the 'file' field in the DHCP header has been used for DHCP options.
keyword
dhcpv4.option.broadcast_address
This option specifies the broadcast address in use on the client's subnet.
ip
dhcpv4.option.class_identifier
This option is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration.
keyword
dhcpv4.option.dns_servers
The domain name server option specifies a list of Domain Name System servers available to the client.
ip
dhcpv4.option.domain_name
This option specifies the domain name that client should use when resolving hostnames via the Domain Name System.
keyword
dhcpv4.option.hostname
This option specifies the name of the client.
keyword
dhcpv4.option.ip_address_lease_time_sec
This option is used in a client request (DHCPDISCOVER or DHCPREQUEST) to allow the client to request a lease time for the IP address. In a server reply (DHCPOFFER), a DHCP server uses this option to specify the lease time it is willing to offer.
long
dhcpv4.option.max_dhcp_message_size
This option specifies the maximum length DHCP message that the client is willing to accept.
long
dhcpv4.option.message
This option is used by a DHCP server to provide an error message to a DHCP client in a DHCPNAK message in the event of a failure. A client may use this option in a DHCPDECLINE message to indicate the why the client declined the offered parameters.
text
dhcpv4.option.message_type
The specific type of DHCP message being sent (e.g. discover, offer, request, decline, ack, nak, release, inform).
keyword
dhcpv4.option.ntp_servers
This option specifies a list of IP addresses indicating NTP servers available to the client.
ip
dhcpv4.option.parameter_request_list
This option is used by a DHCP client to request values for specified configuration parameters.
keyword
dhcpv4.option.rebinding_time_sec
This option specifies the time interval from address assignment until the client transitions to the REBINDING state.
long
dhcpv4.option.renewal_time_sec
This option specifies the time interval from address assignment until the client transitions to the RENEWING state.
long
dhcpv4.option.requested_ip_address
This option is used in a client request (DHCPDISCOVER) to allow the client to request that a particular IP address be assigned.
ip
dhcpv4.option.router
The router option specifies a list of IP addresses for routers on the client's subnet.
ip
dhcpv4.option.server_identifier
IP address of the individual DHCP server which handled this message.
ip
dhcpv4.option.subnet_mask
The subnet mask that the client should use on the currnet network.
ip
dhcpv4.option.time_servers
The time server option specifies a list of RFC 868 time servers available to the client.
ip
dhcpv4.option.utc_time_offset_sec
The time offset field specifies the offset of the client's subnet in seconds from Coordinated Universal Time (UTC).
long
dhcpv4.option.vendor_identifying_options.data
Additional vendor data, encoded in hexadecimal format.
keyword
dhcpv4.option.vendor_identifying_options.id
Device identifier.
keyword
dhcpv4.relay_ip
The relay IP address used by the client to contact the server (i.e. a DHCP relay server).
ip
dhcpv4.seconds
Number of seconds elapsed since client began address acquisition or renewal process.
long
dhcpv4.server_ip
The IP address of the DHCP server that the client should use for the next step in the bootstrap process.
ip
dhcpv4.server_name
The name of the server sending the message. Optional. Used in DHCPOFFER or DHCPACK messages.
keyword
dhcpv4.transaction_id
Transaction ID, a random number chosen by the client, used by the client and server to associate messages and responses between a client and a server.
keyword
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Name of the dataset. If an event source publishes more than one type of log or events (e.g. access log, error log), the dataset is used to specify which one the event comes from. It's recommended but not required to start the dataset name with the module name, followed by a dot, then the dataset name.
keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
flow.id
Internal flow ID based on connection meta data and address.
keyword
flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.
keyword
host.hostname
Hostname of the host. It normally contains what the hostname command returns on the host machine.
keyword
host.id
Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name.
keyword
host.ip
Host ip addresses.
ip
host.mac
Host mac addresses.
keyword
host.name
Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.
keyword
host.os.build
OS build information.
keyword
host.os.codename
OS codename, if any.
keyword
host.os.family
OS family (such as redhat, debian, freebsd, windows).
keyword
host.os.kernel
Operating system kernel version as a raw string.
keyword
host.os.name
Operating system name, without the version.
keyword
host.os.name.text
Multi-field of host.os.name.
text
host.os.platform
Operating system platform (such centos, ubuntu, windows).
keyword
host.os.version
Operating system version as a raw string.
keyword
host.type
Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment.
keyword
method
The command/verb/method of the transaction. For HTTP, this is the method name (GET, POST, PUT, and so on), for SQL this is the verb (SELECT, UPDATE, DELETE, and so on).
keyword
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.community_id
A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.
keyword
network.direction
Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.
keyword
network.forwarded_ip
Host IP address when the source IP address is the proxy.
ip
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
network.transport
Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.
keyword
network.type
In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.
keyword
network_traffic.dhcpv4.assigned_ip
The IP address that the DHCP server is assigning to the client. This field is also known as "your" IP address.
ip
network_traffic.dhcpv4.client_ip
The current IP address of the client.
ip
network_traffic.dhcpv4.client_mac
The client's MAC address (layer two).
keyword
network_traffic.dhcpv4.flags
Flags are set by the client to indicate how the DHCP server should its reply -- either unicast or broadcast.
keyword
network_traffic.dhcpv4.hardware_type
The type of hardware used for the local network (Ethernet, LocalTalk, etc).
keyword
network_traffic.dhcpv4.hops
The number of hops the DHCP message went through.
long
network_traffic.dhcpv4.op_code
The message op code (bootrequest or bootreply).
keyword
network_traffic.dhcpv4.option.boot_file_name
This option is used to identify a bootfile when the 'file' field in the DHCP header has been used for DHCP options.
keyword
network_traffic.dhcpv4.option.broadcast_address
This option specifies the broadcast address in use on the client's subnet.
ip
network_traffic.dhcpv4.option.class_identifier
This option is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration.
keyword
network_traffic.dhcpv4.option.dns_servers
The domain name server option specifies a list of Domain Name System servers available to the client.
ip
network_traffic.dhcpv4.option.domain_name
This option specifies the domain name that client should use when resolving hostnames via the Domain Name System.
keyword
network_traffic.dhcpv4.option.hostname
This option specifies the name of the client.
keyword
network_traffic.dhcpv4.option.ip_address_lease_time_sec
This option is used in a client request (DHCPDISCOVER or DHCPREQUEST) to allow the client to request a lease time for the IP address. In a server reply (DHCPOFFER), a DHCP server uses this option to specify the lease time it is willing to offer.
long
network_traffic.dhcpv4.option.max_dhcp_message_size
This option specifies the maximum length DHCP message that the client is willing to accept.
long
network_traffic.dhcpv4.option.message
This option is used by a DHCP server to provide an error message to a DHCP client in a DHCPNAK message in the event of a failure. A client may use this option in a DHCPDECLINE message to indicate the why the client declined the offered parameters.
text
network_traffic.dhcpv4.option.message_type
The specific type of DHCP message being sent (e.g. discover, offer, request, decline, ack, nak, release, inform).
keyword
network_traffic.dhcpv4.option.ntp_servers
This option specifies a list of IP addresses indicating NTP servers available to the client.
ip
network_traffic.dhcpv4.option.parameter_request_list
This option is used by a DHCP client to request values for specified configuration parameters.
keyword
network_traffic.dhcpv4.option.rebinding_time_sec
This option specifies the time interval from address assignment until the client transitions to the REBINDING state.
long
network_traffic.dhcpv4.option.renewal_time_sec
This option specifies the time interval from address assignment until the client transitions to the RENEWING state.
long
network_traffic.dhcpv4.option.requested_ip_address
This option is used in a client request (DHCPDISCOVER) to allow the client to request that a particular IP address be assigned.
ip
network_traffic.dhcpv4.option.router
The router option specifies a list of IP addresses for routers on the client's subnet.
ip
network_traffic.dhcpv4.option.server_identifier
IP address of the individual DHCP server which handled this message.
ip
network_traffic.dhcpv4.option.subnet_mask
The subnet mask that the client should use on the currnet network.
ip
network_traffic.dhcpv4.option.time_servers
The time server option specifies a list of RFC 868 time servers available to the client.
ip
network_traffic.dhcpv4.option.utc_time_offset_sec
The time offset field specifies the offset of the client's subnet in seconds from Coordinated Universal Time (UTC).
long
network_traffic.dhcpv4.option.vendor_identifying_options.data
Additional vendor data, encoded in hexadecimal format.
keyword
network_traffic.dhcpv4.option.vendor_identifying_options.id
Device identifier.
keyword
network_traffic.dhcpv4.relay_ip
The relay IP address used by the client to contact the server (i.e. a DHCP relay server).
ip
network_traffic.dhcpv4.seconds
Number of seconds elapsed since client began address acquisition or renewal process.
long
network_traffic.dhcpv4.server_ip
The IP address of the DHCP server that the client should use for the next step in the bootstrap process.
ip
network_traffic.dhcpv4.server_name
The name of the server sending the message. Optional. Used in DHCPOFFER or DHCPACK messages.
keyword
network_traffic.dhcpv4.transaction_id
Transaction ID, a random number chosen by the client, used by the client and server to associate messages and responses between a client and a server.
keyword
network_traffic.status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
observer.hostname
Hostname of the observer.
keyword
observer.ip
IP addresses of the observer.
ip
observer.mac
MAC addresses of the observer. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
params
The request parameters. For HTTP, these are the POST or GET parameters. For Thrift-RPC, these are the parameters from the request.
text
path
The path the transaction refers to. For HTTP, this is the URL. For SQL databases, this is the table name. For key-value stores, this is the key.
keyword
process.args
Array of process arguments, starting with the absolute path to the executable. May be filtered to protect sensitive information.
keyword
process.executable
Absolute path to the process executable.
keyword
process.executable.text
Multi-field of process.executable.
match_only_text
process.name
Process name. Sometimes called program name or similar.
keyword
process.name.text
Multi-field of process.name.
match_only_text
process.start
The time the process started.
date
process.working_directory
The working directory of the process.
keyword
process.working_directory.text
Multi-field of process.working_directory.
match_only_text
query
The query in a human readable format. For HTTP, it will typically be something like GET /users/_search?name=test. For MySQL, it is something like SELECT id from users where name=test.
keyword
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
request
For text protocols, this is the request as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
resource
The logical resource that this transaction refers to. For HTTP, this is the URL path up to the last slash (/). For example, if the URL is /users/1, the resource is /users. For databases, the resource is typically the table name. The field is not filled for all transaction types.
keyword
response
For text protocols, this is the response as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
server.bytes
Bytes sent from the server to the client.
long
server.geo.city_name
City name.
keyword
server.geo.continent_name
Name of the continent.
keyword
server.geo.country_iso_code
Country ISO code.
keyword
server.geo.country_name
Country name.
keyword
server.geo.location
Longitude and latitude.
geo_point
server.geo.region_iso_code
Region ISO code.
keyword
server.geo.region_name
Region name.
keyword
server.ip
IP address of the server (IPv4 or IPv6).
ip
server.port
Port of the server.
long
server.process.args
The command-line of the process that served the transaction.
keyword
server.process.executable
Absolute path to the server process executable.
keyword
server.process.name
The name of the process that served the transaction.
keyword
server.process.start
The time the server process started.
date
server.process.working_directory
The working directory of the server process.
keyword
source.bytes
Bytes sent from the source to the destination.
long
source.geo.city_name
City name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.port
Port of the source.
long
status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
tags
List of keywords used to tag each event.
keyword
type
The type of the transaction (for example, HTTP, MySQL, Redis, or RUM) or "flow" in case of flows.
keyword

An example event for dhcpv4 looks as following:

{
    "@timestamp": "2023-10-16T22:31:47.648Z",
    "agent": {
        "ephemeral_id": "a1bdc581-8ac7-4f07-a78a-656bceaa0c91",
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "name": "docker-fleet-agent",
        "type": "packetbeat",
        "version": "8.6.2"
    },
    "client": {
        "bytes": 272,
        "ip": "0.0.0.0",
        "port": 68
    },
    "data_stream": {
        "dataset": "network_traffic.dhcpv4",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "ip": "255.255.255.255",
        "port": 67
    },
    "dhcpv4": {
        "client_mac": "00-0B-82-01-FC-42",
        "flags": "unicast",
        "hardware_type": "Ethernet",
        "hops": 0,
        "op_code": "bootrequest",
        "option": {
            "message_type": "discover",
            "parameter_request_list": [
                "Subnet Mask",
                "Router",
                "Domain Name Server",
                "NTP Servers"
            ],
            "requested_ip_address": "0.0.0.0"
        },
        "seconds": 0,
        "transaction_id": "0x00003d1d"
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "snapshot": false,
        "version": "8.6.2"
    },
    "event": {
        "agent_id_status": "verified",
        "category": [
            "network"
        ],
        "dataset": "network_traffic.dhcpv4",
        "ingested": "2023-10-16T22:31:48Z",
        "kind": "event",
        "start": "2023-10-16T22:31:47.648Z",
        "type": [
            "connection",
            "protocol"
        ]
    },
    "host": {
        "architecture": "x86_64",
        "containerized": false,
        "hostname": "docker-fleet-agent",
        "id": "f91b175388d443fca5c155815dfc2279",
        "ip": [
            "172.19.0.7"
        ],
        "mac": [
            "02-42-AC-13-00-07"
        ],
        "name": "docker-fleet-agent",
        "os": {
            "codename": "focal",
            "family": "debian",
            "kernel": "5.15.49-linuxkit",
            "name": "Ubuntu",
            "platform": "ubuntu",
            "type": "linux",
            "version": "20.04.5 LTS (Focal Fossa)"
        }
    },
    "network": {
        "bytes": 272,
        "community_id": "1:t9O1j0qj71O4wJM7gnaHtgmfev8=",
        "direction": "unknown",
        "protocol": "dhcpv4",
        "transport": "udp",
        "type": "ipv4"
    },
    "related": {
        "ip": [
            "0.0.0.0",
            "255.255.255.255"
        ]
    },
    "server": {
        "ip": "255.255.255.255",
        "port": 67
    },
    "source": {
        "bytes": 272,
        "ip": "0.0.0.0",
        "port": 68
    },
    "status": "OK",
    "type": "dhcpv4"
}

DNS

The DNS protocol supports processing DNS messages on TCP and UDP.

Configuration options

Also see Common protocol options.

include_authorities

If this option is enabled, dns.authority fields (authority resource records) are added to DNS events. The default is false.

include_additionals

If this option is enabled, dns.additionals fields (additional resource records) are added to DNS events. The default is false.

Fields published for DNS packets.

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
client.bytes
Bytes sent from the client to the server.
long
client.geo.city_name
City name.
keyword
client.geo.continent_name
Name of the continent.
keyword
client.geo.country_iso_code
Country ISO code.
keyword
client.geo.country_name
Country name.
keyword
client.geo.location
Longitude and latitude.
geo_point
client.geo.region_iso_code
Region ISO code.
keyword
client.geo.region_name
Region name.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.process.args
The command-line of the process that initiated the transaction.
keyword
client.process.executable
Absolute path to the client process executable.
keyword
client.process.name
The name of the process that initiated the transaction.
keyword
client.process.start
The time the client process started.
date
client.process.working_directory
The working directory of the client process.
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.geo.city_name
City name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.port
Port of the destination.
long
dns.additionals
An array containing a dictionary for each additional section from the answer.
flattened
dns.additionals.class
The class of DNS data contained in this resource record.
keyword
dns.additionals.data
The data describing the resource. The meaning of this data depends on the type and class of the resource record.
keyword
dns.additionals.name
The domain name to which this resource record pertains.
keyword
dns.additionals.ttl
The time interval in seconds that this resource record may be cached before it should be discarded. Zero values mean that the data should not be cached.
long
dns.additionals.type
The type of data contained in this resource record.
keyword
dns.additionals_count
The number of resource records contained in the dns.additionals field. The dns.additionals field may or may not be included depending on the configuration of Packetbeat.
long
dns.answers
An array containing an object for each answer section returned by the server. The main keys that should be present in these objects are defined by ECS. Records that have more information may contain more keys than what ECS defines. Not all DNS data sources give all details about DNS answers. At minimum, answer objects must contain the data key. If more information is available, map as much of it to ECS as possible, and add any additional fields to the answer objects as custom fields.
group
dns.answers.class
The class of DNS data contained in this resource record.
keyword
dns.answers.data
The data describing the resource. The meaning of this data depends on the type and class of the resource record.
keyword
dns.answers.name
The domain name to which this resource record pertains. If a chain of CNAME is being resolved, each answer's name should be the one that corresponds with the answer's data. It should not simply be the original question.name repeated.
keyword
dns.answers.ttl
The time interval in seconds that this resource record may be cached before it should be discarded. Zero values mean that the data should not be cached.
long
dns.answers.type
The type of data contained in this resource record.
keyword
dns.answers_count
The number of resource records contained in the dns.answers field.
long
dns.authorities
An array containing a dictionary for each authority section from the answer.
flattened
dns.authorities.class
The class of DNS data contained in this resource record.
keyword
dns.authorities.name
The domain name to which this resource record pertains.
keyword
dns.authorities.type
The type of data contained in this resource record.
keyword
dns.authorities_count
The number of resource records contained in the dns.authorities field. The dns.authorities field may or may not be included depending on the configuration of Packetbeat.
long
dns.flags.authentic_data
A DNS flag specifying that the recursive server considers the response authentic.
boolean
dns.flags.authoritative
A DNS flag specifying that the responding server is an authority for the domain name used in the question.
boolean
dns.flags.checking_disabled
A DNS flag specifying that the client disables the server signature validation of the query.
boolean
dns.flags.recursion_available
A DNS flag specifying whether recursive query support is available in the name server.
boolean
dns.flags.recursion_desired
A DNS flag specifying that the client directs the server to pursue a query recursively. Recursive query support is optional.
boolean
dns.flags.truncated_response
A DNS flag specifying that only the first 512 bytes of the reply were returned.
boolean
dns.header_flags
Array of 2 letter DNS header flags.
keyword
dns.id
The DNS packet identifier assigned by the program that generated the query. The identifier is copied to the response.
keyword
dns.op_code
The DNS operation code that specifies the kind of query in the message. This value is set by the originator of a query and copied into the response.
keyword
dns.opt.do
If set, the transaction uses DNSSEC.
boolean
dns.opt.ext_rcode
Extended response code field.
keyword
dns.opt.udp_size
Requestor's UDP payload size (in bytes).
long
dns.opt.version
The EDNS version.
keyword
dns.question.class
The class of records being queried.
keyword
dns.question.etld_plus_one
The effective top-level domain (eTLD) plus one more label. For example, the eTLD+1 for "foo.bar.golang.org." is "golang.org.". The data for determining the eTLD comes from an embedded copy of the data from http://publicsuffix.org.
keyword
dns.question.name
The name being queried. If the name field contains non-printable characters (below 32 or above 126), those characters should be represented as escaped base 10 integers (\DDD). Back slashes and quotes should be escaped. Tabs, carriage returns, and line feeds should be converted to \t, \r, and \n respectively.
keyword
dns.question.registered_domain
The highest registered domain, stripped of the subdomain. For example, the registered domain for "foo.example.com" is "example.com". This value can be determined precisely with a list like the public suffix list (http://publicsuffix.org). Trying to approximate this by simply taking the last two labels will not work well for TLDs such as "co.uk".
keyword
dns.question.subdomain
The subdomain is all of the labels under the registered_domain. If the domain has multiple levels of subdomain, such as "sub2.sub1.example.com", the subdomain field should contain "sub2.sub1", with no trailing period.
keyword
dns.question.top_level_domain
The effective top level domain (eTLD), also known as the domain suffix, is the last part of the domain name. For example, the top level domain for example.com is "com". This value can be determined precisely with a list like the public suffix list (http://publicsuffix.org). Trying to approximate this by simply taking the last label will not work well for effective TLDs such as "co.uk".
keyword
dns.question.type
The type of record being queried.
keyword
dns.resolved_ip
Array containing all IPs seen in answers.data. The answers array can be difficult to use, because of the variety of data formats it can contain. Extracting all IP addresses seen in there to dns.resolved_ip makes it possible to index them as IP addresses, and makes them easier to visualize and query for.
ip
dns.response_code
The DNS response code.
keyword
dns.type
The type of DNS event captured, query or answer. If your source of DNS events only gives you DNS queries, you should only create dns events of type dns.type:query. If your source of DNS events gives you answers as well, you should create one event per query (optionally as soon as the query is seen). And a second event containing all query details as well as an array of answers.
keyword
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Name of the dataset. If an event source publishes more than one type of log or events (e.g. access log, error log), the dataset is used to specify which one the event comes from. It's recommended but not required to start the dataset name with the module name, followed by a dot, then the dataset name.
keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
flow.id
Internal flow ID based on connection meta data and address.
keyword
flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.
keyword
host.hostname
Hostname of the host. It normally contains what the hostname command returns on the host machine.
keyword
host.id
Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name.
keyword
host.ip
Host ip addresses.
ip
host.mac
Host mac addresses.
keyword
host.name
Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.
keyword
host.os.build
OS build information.
keyword
host.os.codename
OS codename, if any.
keyword
host.os.family
OS family (such as redhat, debian, freebsd, windows).
keyword
host.os.kernel
Operating system kernel version as a raw string.
keyword
host.os.name
Operating system name, without the version.
keyword
host.os.name.text
Multi-field of host.os.name.
text
host.os.platform
Operating system platform (such centos, ubuntu, windows).
keyword
host.os.version
Operating system version as a raw string.
keyword
host.type
Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment.
keyword
method
The command/verb/method of the transaction. For HTTP, this is the method name (GET, POST, PUT, and so on), for SQL this is the verb (SELECT, UPDATE, DELETE, and so on).
keyword
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.community_id
A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.
keyword
network.direction
Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.
keyword
network.forwarded_ip
Host IP address when the source IP address is the proxy.
ip
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
network.transport
Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.
keyword
network.type
In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.
keyword
network_traffic.dns.additionals
An array containing a dictionary for each additional section from the answer.
flattened
network_traffic.dns.additionals.class
The class of DNS data contained in this resource record.
keyword
network_traffic.dns.additionals.data
The data describing the resource. The meaning of this data depends on the type and class of the resource record.
keyword
network_traffic.dns.additionals.name
The domain name to which this resource record pertains.
keyword
network_traffic.dns.additionals.ttl
The time interval in seconds that this resource record may be cached before it should be discarded. Zero values mean that the data should not be cached.
long
network_traffic.dns.additionals.type
The type of data contained in this resource record.
keyword
network_traffic.dns.additionals_count
The number of resource records contained in the dns.additionals field. The dns.additionals field may or may not be included depending on the configuration of Packetbeat.
long
network_traffic.dns.answers_count
The number of resource records contained in the dns.answers field.
long
network_traffic.dns.authorities
An array containing a dictionary for each authority section from the answer.
flattened
network_traffic.dns.authorities.class
The class of DNS data contained in this resource record.
keyword
network_traffic.dns.authorities.name
The domain name to which this resource record pertains.
keyword
network_traffic.dns.authorities.type
The type of data contained in this resource record.
keyword
network_traffic.dns.authorities_count
The number of resource records contained in the dns.authorities field. The dns.authorities field may or may not be included depending on the configuration of Packetbeat.
long
network_traffic.dns.flags.authentic_data
A DNS flag specifying that the recursive server considers the response authentic.
boolean
network_traffic.dns.flags.authoritative
A DNS flag specifying that the responding server is an authority for the domain name used in the question.
boolean
network_traffic.dns.flags.checking_disabled
A DNS flag specifying that the client disables the server signature validation of the query.
boolean
network_traffic.dns.flags.recursion_available
A DNS flag specifying whether recursive query support is available in the name server.
boolean
network_traffic.dns.flags.recursion_desired
A DNS flag specifying that the client directs the server to pursue a query recursively. Recursive query support is optional.
boolean
network_traffic.dns.flags.truncated_response
A DNS flag specifying that only the first 512 bytes of the reply were returned.
boolean
network_traffic.dns.method
The command/verb/method of the transaction.
keyword
network_traffic.dns.opt.do
If set, the transaction uses DNSSEC.
boolean
network_traffic.dns.opt.ext_rcode
Extended response code field.
keyword
network_traffic.dns.opt.udp_size
Requestor's UDP payload size (in bytes).
long
network_traffic.dns.opt.version
The EDNS version.
keyword
network_traffic.dns.query
The query in a human readable format.
keyword
network_traffic.dns.question.etld_plus_one
The effective top-level domain (eTLD) plus one more label. For example, the eTLD+1 for "foo.bar.golang.org." is "golang.org.". The data for determining the eTLD comes from an embedded copy of the data from http://publicsuffix.org.
keyword
network_traffic.dns.resource
The logical resource that this transaction refers to.
keyword
network_traffic.status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
observer.hostname
Hostname of the observer.
keyword
observer.ip
IP addresses of the observer.
ip
observer.mac
MAC addresses of the observer. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
params
The request parameters. For HTTP, these are the POST or GET parameters. For Thrift-RPC, these are the parameters from the request.
text
path
The path the transaction refers to. For HTTP, this is the URL. For SQL databases, this is the table name. For key-value stores, this is the key.
keyword
process.args
Array of process arguments, starting with the absolute path to the executable. May be filtered to protect sensitive information.
keyword
process.executable
Absolute path to the process executable.
keyword
process.executable.text
Multi-field of process.executable.
match_only_text
process.name
Process name. Sometimes called program name or similar.
keyword
process.name.text
Multi-field of process.name.
match_only_text
process.start
The time the process started.
date
process.working_directory
The working directory of the process.
keyword
process.working_directory.text
Multi-field of process.working_directory.
match_only_text
query
The query in a human readable format. For HTTP, it will typically be something like GET /users/_search?name=test. For MySQL, it is something like SELECT id from users where name=test.
keyword
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
request
For text protocols, this is the request as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
resource
The logical resource that this transaction refers to. For HTTP, this is the URL path up to the last slash (/). For example, if the URL is /users/1, the resource is /users. For databases, the resource is typically the table name. The field is not filled for all transaction types.
keyword
response
For text protocols, this is the response as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
server.bytes
Bytes sent from the server to the client.
long
server.geo.city_name
City name.
keyword
server.geo.continent_name
Name of the continent.
keyword
server.geo.country_iso_code
Country ISO code.
keyword
server.geo.country_name
Country name.
keyword
server.geo.location
Longitude and latitude.
geo_point
server.geo.region_iso_code
Region ISO code.
keyword
server.geo.region_name
Region name.
keyword
server.ip
IP address of the server (IPv4 or IPv6).
ip
server.port
Port of the server.
long
server.process.args
The command-line of the process that served the transaction.
keyword
server.process.executable
Absolute path to the server process executable.
keyword
server.process.name
The name of the process that served the transaction.
keyword
server.process.start
The time the server process started.
date
server.process.working_directory
The working directory of the server process.
keyword
source.bytes
Bytes sent from the source to the destination.
long
source.geo.city_name
City name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.port
Port of the source.
long
status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
tags
List of keywords used to tag each event.
keyword
type
The type of the transaction (for example, HTTP, MySQL, Redis, or RUM) or "flow" in case of flows.
keyword

An example event for dns looks as following:

{
    "@timestamp": "2023-10-16T22:36:55.594Z",
    "agent": {
        "ephemeral_id": "1aa050cd-250a-42b2-88cc-25d4a1e3b123",
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "name": "docker-fleet-agent",
        "type": "packetbeat",
        "version": "8.6.2"
    },
    "client": {
        "bytes": 28,
        "ip": "192.168.238.68",
        "port": 53765
    },
    "data_stream": {
        "dataset": "network_traffic.dns",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "bytes": 167,
        "ip": "8.8.8.8",
        "port": 53
    },
    "dns": {
        "additionals_count": 0,
        "answers": [
            {
                "class": "IN",
                "data": "ns-1183.awsdns-19.org",
                "name": "elastic.co",
                "ttl": "21599",
                "type": "NS"
            },
            {
                "class": "IN",
                "data": "ns-2007.awsdns-58.co.uk",
                "name": "elastic.co",
                "ttl": "21599",
                "type": "NS"
            },
            {
                "class": "IN",
                "data": "ns-66.awsdns-08.com",
                "name": "elastic.co",
                "ttl": "21599",
                "type": "NS"
            },
            {
                "class": "IN",
                "data": "ns-835.awsdns-40.net",
                "name": "elastic.co",
                "ttl": "21599",
                "type": "NS"
            }
        ],
        "answers_count": 4,
        "authorities_count": 0,
        "flags": {
            "authentic_data": false,
            "authoritative": false,
            "checking_disabled": false,
            "recursion_available": true,
            "recursion_desired": true,
            "truncated_response": false
        },
        "header_flags": [
            "RD",
            "RA"
        ],
        "id": 26187,
        "op_code": "QUERY",
        "question": {
            "class": "IN",
            "etld_plus_one": "elastic.co",
            "name": "elastic.co",
            "registered_domain": "elastic.co",
            "top_level_domain": "co",
            "type": "NS"
        },
        "response_code": "NOERROR",
        "type": "answer"
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "snapshot": false,
        "version": "8.6.2"
    },
    "event": {
        "agent_id_status": "verified",
        "category": [
            "network"
        ],
        "dataset": "network_traffic.dns",
        "duration": 68791650,
        "end": "2023-10-16T22:36:55.663Z",
        "ingested": "2023-10-16T22:36:56Z",
        "kind": "event",
        "start": "2023-10-16T22:36:55.594Z",
        "type": [
            "connection",
            "protocol"
        ]
    },
    "host": {
        "architecture": "x86_64",
        "containerized": false,
        "hostname": "docker-fleet-agent",
        "id": "f91b175388d443fca5c155815dfc2279",
        "ip": [
            "172.19.0.7"
        ],
        "mac": [
            "02-42-AC-13-00-07"
        ],
        "name": "docker-fleet-agent",
        "os": {
            "codename": "focal",
            "family": "debian",
            "kernel": "5.15.49-linuxkit",
            "name": "Ubuntu",
            "platform": "ubuntu",
            "type": "linux",
            "version": "20.04.5 LTS (Focal Fossa)"
        }
    },
    "method": "QUERY",
    "network": {
        "bytes": 195,
        "community_id": "1:3P4ruI0bVlqxiTAs0WyBhnF74ek=",
        "direction": "unknown",
        "protocol": "dns",
        "transport": "udp",
        "type": "ipv4"
    },
    "query": "class IN, type NS, elastic.co",
    "related": {
        "ip": [
            "192.168.238.68",
            "8.8.8.8"
        ]
    },
    "resource": "elastic.co",
    "server": {
        "bytes": 167,
        "ip": "8.8.8.8",
        "port": 53
    },
    "source": {
        "bytes": 28,
        "ip": "192.168.238.68",
        "port": 53765
    },
    "status": "OK",
    "type": "dns"
}

HTTP

Configuration options

Also see Common protocol options.

hide_keywords

A list of query parameters that Network Packet Capture will automatically censor in the transactions that it saves. The values associated with these parameters are replaced by 'xxxxx'. By default, no changes are made to the HTTP messages.

Network Packet Capture has this option because, unlike SQL traffic, which typically only contains the hashes of the passwords, HTTP traffic may contain sensitive data. To reduce security risks, you can configure this option to avoid sending the contents of certain HTTP POST parameters.

This option replaces query parameters from GET requests and top-level parameters from POST requests. If sensitive data is encoded inside a parameter that you don’t specify here, Network Packet Capture cannot censor it. Also, note that if you configure Network Packet Capture to save the raw request and response fields (see the send_request and the send_response options), sensitive data may be present in those fields.

redact_authorization

When this option is enabled, Network Packet Capture obscures the value of Authorization and Proxy-Authorization HTTP headers, and censors those strings in the response.

You should set this option to true for transactions that use Basic Authentication because they may contain the base64 unencrypted username and password.

send_headers

A list of header names to capture and send to Elasticsearch. These headers are placed under the headers dictionary in the resulting JSON.

send_all_headers

Instead of sending a white list of headers to Elasticsearch, you can send all headers by setting this option to true. The default is false.

redact_headers

A list of headers to redact if present in the HTTP request. This will keep the header field present, but will redact it’s value to show the header’s presence.

include_body_for

The list of content types for which Network Packet Capture exports the full HTTP payload. The HTTP body is available under http.request.body.content and http.response.body.content for these Content-Types.

In addition, if send_response option is enabled, then the HTTP body is exported together with the HTTP headers under response and if send_request enabled, then request contains the entire HTTP message including the body.

In the following example, the HTML attachments of the HTTP responses are exported under the response field and under http.request.body.content or http.response.body.content:

Network Packet Capture.protocols:
- type: http
  ports: [80, 8080]
  send_response: true
  include_body_for: ["text/html"]

decode_body

A boolean flag that controls decoding of HTTP payload. It interprets the Content-Encoding and Transfer-Encoding headers and uncompresses the entity body. Supported encodings are gzip and deflate. This option is only applicable in the cases where the HTTP payload is exported, that is, when one of the include_*_body_for options is specified or a POST request contains url-encoded parameters.

If the Cookie or Set-Cookie headers are sent, this option controls whether they are split into individual values. For example, with this option set, an HTTP response might result in the following JSON:

"response": {
  "code": 200,
  "headers": {
    "connection": "close",
    "content-language": "en",
    "content-type": "text/html; charset=utf-8",
    "date": "Fri, 21 Nov 2014 17:07:34 GMT",
    "server": "gunicorn/19.1.1",
    "set-cookie": {
      "csrftoken": "S9ZuJF8mvIMT5CL4T1Xqn32wkA6ZSeyf",
      "expires": "Fri, 20-Nov-2015 17:07:34 GMT",
      "max-age": "31449600",
      "path": "/"
    },
    "vary": "Cookie, Accept-Language"
  },
  "status_phrase": "OK"
}
  • Note that set-cookie is a map containing the cookie names as keys.

The default is false.

real_ip_header

The header field to extract the real IP from. This setting is useful when you want to capture traffic behind a reverse proxy, but you want to get the geo-location information. If this header is present and contains a valid IP addresses, the information is used for the network.forwarded_ip field.

max_message_size

If an individual HTTP message is larger than this setting (in bytes), it will be trimmed to this size. Unless this value is very small (less than 1.5K), Network Packet Capture is able to still correctly follow the transaction and create an event for it. The default is 10485760 (10 MB).

Fields published for HTTP packets.

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
client.bytes
Bytes sent from the client to the server.
long
client.geo.city_name
City name.
keyword
client.geo.continent_name
Name of the continent.
keyword
client.geo.country_iso_code
Country ISO code.
keyword
client.geo.country_name
Country name.
keyword
client.geo.location
Longitude and latitude.
geo_point
client.geo.region_iso_code
Region ISO code.
keyword
client.geo.region_name
Region name.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.process.args
The command-line of the process that initiated the transaction.
keyword
client.process.executable
Absolute path to the client process executable.
keyword
client.process.name
The name of the process that initiated the transaction.
keyword
client.process.start
The time the client process started.
date
client.process.working_directory
The working directory of the client process.
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.domain
The domain name of the destination system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.
keyword
destination.geo.city_name
City name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.port
Port of the destination.
long
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Name of the dataset. If an event source publishes more than one type of log or events (e.g. access log, error log), the dataset is used to specify which one the event comes from. It's recommended but not required to start the dataset name with the module name, followed by a dot, then the dataset name.
keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
flow.id
Internal flow ID based on connection meta data and address.
keyword
flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host's LDAP provider.
keyword
host.hostname
Hostname of the host. It normally contains what the hostname command returns on the host machine.
keyword
host.id
Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name.
keyword
host.ip
Host ip addresses.
ip
host.mac
Host mac addresses.
keyword
host.name
Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use.
keyword
host.os.build
OS build information.
keyword
host.os.codename
OS codename, if any.
keyword
host.os.family
OS family (such as redhat, debian, freebsd, windows).
keyword
host.os.kernel
Operating system kernel version as a raw string.
keyword
host.os.name
Operating system name, without the version.
keyword
host.os.name.text
Multi-field of host.os.name.
text
host.os.platform
Operating system platform (such centos, ubuntu, windows).
keyword
host.os.version
Operating system version as a raw string.
keyword
host.type
Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment.
keyword
http.request.body.bytes
Size in bytes of the request body.
long
http.request.bytes
Total size in bytes of the request (body and headers).
long
http.request.headers
A map containing the captured header fields from the request. Which headers to capture is configurable. If headers with the same header name are present in the message, they will be separated by commas.
flattened
http.request.method
HTTP request method. The value should retain its casing from the original event. For example, GET, get, and GeT are all considered valid values for this field.
keyword
http.request.referrer
Referrer for this HTTP request.
keyword
http.response.body.bytes
Size in bytes of the response body.
long
http.response.bytes
Total size in bytes of the response (body and headers).
long
http.response.headers
A map containing the captured header fields from the response. Which headers to capture is configurable. If headers with the same header name are present in the message, they will be separated by commas.
flattened
http.response.status_code
HTTP response status code.
long
http.response.status_phrase
The HTTP status phrase.
keyword
http.version
HTTP version.
keyword
method
The command/verb/method of the transaction. For HTTP, this is the method name (GET, POST, PUT, and so on), for SQL this is the verb (SELECT, UPDATE, DELETE, and so on).
keyword
network.bytes
Total bytes transferred in both directions. If source.bytes and destination.bytes are known, network.bytes is their sum.
long
network.community_id
A hash of source and destination IPs and ports, as well as the protocol used in a communication. This is a tool-agnostic standard to identify flows. Learn more at https://github.com/corelight/community-id-spec.
keyword
network.direction
Direction of the network traffic. When mapping events from a host-based monitoring context, populate this field from the host's point of view, using the values "ingress" or "egress". When mapping events from a network or perimeter-based monitoring context, populate this field from the point of view of the network perimeter, using the values "inbound", "outbound", "internal" or "external". Note that "internal" is not crossing perimeter boundaries, and is meant to describe communication between two hosts within the perimeter. Note also that "external" is meant to describe traffic between two hosts that are external to the perimeter. This could for example be useful for ISPs or VPN service providers.
keyword
network.forwarded_ip
Host IP address when the source IP address is the proxy.
ip
network.protocol
In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying.
keyword
network.transport
Same as network.iana_number, but instead using the Keyword name of the transport layer (udp, tcp, ipv6-icmp, etc.) The field value must be normalized to lowercase for querying.
keyword
network.type
In the OSI Model this would be the Network Layer. ipv4, ipv6, ipsec, pim, etc The field value must be normalized to lowercase for querying.
keyword
network_traffic.http.query
The query in a human readable format, be something like GET /users/_search?name=test.
keyword
network_traffic.http.request.headers
A map containing the captured header fields from the request. Which headers to capture is configurable. If headers with the same header name are present in the message, they will be separated by commas.
flattened
network_traffic.http.response.headers
A map containing the captured header fields from the response. Which headers to capture is configurable. If headers with the same header name are present in the message, they will be separated by commas.
flattened
network_traffic.http.response.status_phrase
The HTTP status phrase.
keyword
network_traffic.status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
observer.hostname
Hostname of the observer.
keyword
observer.ip
IP addresses of the observer.
ip
observer.mac
MAC addresses of the observer. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen.
keyword
observer.name
Custom name of the observer. This is a name that can be given to an observer. This can be helpful for example if multiple firewalls of the same model are used in an organization. If no custom name is needed, the field can be left empty.
keyword
params
The request parameters. For HTTP, these are the POST or GET parameters. For Thrift-RPC, these are the parameters from the request.
text
path
The path the transaction refers to. For HTTP, this is the URL. For SQL databases, this is the table name. For key-value stores, this is the key.
keyword
process.args
Array of process arguments, starting with the absolute path to the executable. May be filtered to protect sensitive information.
keyword
process.executable
Absolute path to the process executable.
keyword
process.executable.text
Multi-field of process.executable.
match_only_text
process.name
Process name. Sometimes called program name or similar.
keyword
process.name.text
Multi-field of process.name.
match_only_text
process.start
The time the process started.
date
process.working_directory
The working directory of the process.
keyword
process.working_directory.text
Multi-field of process.working_directory.
match_only_text
query
The query in a human readable format. For HTTP, it will typically be something like GET /users/_search?name=test. For MySQL, it is something like SELECT id from users where name=test.
keyword
related.hosts
All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases.
keyword
related.ip
All of the IPs seen on your event.
ip
request
For text protocols, this is the request as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
resource
The logical resource that this transaction refers to. For HTTP, this is the URL path up to the last slash (/). For example, if the URL is /users/1, the resource is /users. For databases, the resource is typically the table name. The field is not filled for all transaction types.
keyword
response
For text protocols, this is the response as seen on the wire (application layer only). For binary protocols this is our representation of the request.
text
server.bytes
Bytes sent from the server to the client.
long
server.domain
The domain name of the server system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment.
keyword
server.geo.city_name
City name.
keyword
server.geo.continent_name
Name of the continent.
keyword
server.geo.country_iso_code
Country ISO code.
keyword
server.geo.country_name
Country name.
keyword
server.geo.location
Longitude and latitude.
geo_point
server.geo.region_iso_code
Region ISO code.
keyword
server.geo.region_name
Region name.
keyword
server.ip
IP address of the server (IPv4 or IPv6).
ip
server.port
Port of the server.
long
server.process.args
The command-line of the process that served the transaction.
keyword
server.process.executable
Absolute path to the server process executable.
keyword
server.process.name
The name of the process that served the transaction.
keyword
server.process.start
The time the server process started.
date
server.process.working_directory
The working directory of the server process.
keyword
source.bytes
Bytes sent from the source to the destination.
long
source.geo.city_name
City name.
keyword
source.geo.continent_name
Name of the continent.
keyword
source.geo.country_iso_code
Country ISO code.
keyword
source.geo.country_name
Country name.
keyword
source.geo.location
Longitude and latitude.
geo_point
source.geo.region_iso_code
Region ISO code.
keyword
source.geo.region_name
Region name.
keyword
source.ip
IP address of the source (IPv4 or IPv6).
ip
source.port
Port of the source.
long
status
The high level status of the transaction. The way to compute this value depends on the protocol, but the result has a meaning independent of the protocol.
keyword
tags
List of keywords used to tag each event.
keyword
type
The type of the transaction (for example, HTTP, MySQL, Redis, or RUM) or "flow" in case of flows.
keyword
url.domain
Domain of the url, such as "www.elastic.co". In some cases a URL may refer to an IP and/or port directly, without a domain name. In this case, the IP address would go to the domain field. If the URL contains a literal IPv6 address enclosed by [ and ] (IETF RFC 2732), the [ and ] characters should also be captured in the domain field.
keyword
url.extension
The field contains the file extension from the original request url, excluding the leading dot. The file extension is only set if it exists, as not every url has a file extension. The leading period must not be included. For example, the value must be "png", not ".png". Note that when the file name has multiple extensions (example.tar.gz), only the last one should be captured ("gz", not "tar.gz").
keyword
url.full
If full URLs are important to your use case, they should be stored in url.full, whether this field is reconstructed or present in the event source.
wildcard
url.full.text
Multi-field of url.full.
match_only_text
url.path
Path of the request, such as "/search".
wildcard
url.port
Port of the request, such as 443.
long
url.query
The query field describes the query string of the request, such as "q=elasticsearch". The ? is excluded from the query string. If a URL contains no ?, there is no query field. If there is a ? but no query, the query field exists with an empty string. The exists query can be used to differentiate between the two cases.
keyword
url.scheme
Scheme of the request, such as "https". Note: The : is not part of the scheme.
keyword
user_agent.original
Unparsed user_agent string.
keyword
user_agent.original.text
Multi-field of user_agent.original.
match_only_text

An example event for http looks as following:

{
    "@timestamp": "2023-10-16T23:41:13.068Z",
    "agent": {
        "ephemeral_id": "e4d5d369-0170-43e1-9a37-89bddea96654",
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "name": "docker-fleet-agent",
        "type": "packetbeat",
        "version": "8.6.2"
    },
    "client": {
        "bytes": 211,
        "ip": "192.168.238.50",
        "port": 64770
    },
    "data_stream": {
        "dataset": "network_traffic.http",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "bytes": 9108,
        "domain": "packetbeat.com",
        "ip": "107.170.1.22",
        "port": 80
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "f923dfe0-3acb-4f62-9ab4-1fabb8e8e112",
        "snapshot": false,
        "version": "8.6.2"
    },
    "event": {
        "agent_id_status": "verified",
        "category": [
            "network"
        ],
        "dataset": "network_traffic.http",
        "duration": 141073381,
        "end": "2023-10-16T23:41:13.209Z",
        "ingested": "2023-10-16T23:41:14Z",
        "kind": "event",
        "start": "2023-10-16T23:41:13.068Z",
        "type": [
            "connection",
            "protocol"
        ]
    },
    "host": {
        "architecture": "x86_64",
        "containerized": false,
        "hostname": "docker-fleet-agent",
        "id": "f91b175388d443fca5c155815dfc2279",
        "ip": [
            "172.19.0.7"
        ],
        "mac": [
            "02-42-AC-13-00-07"
        ],
        "name": "docker-fleet-agent",
        "os": {
            "codename": "focal",
            "family": "debian",
            "kernel": "5.15.49-linuxkit",
            "name": "Ubuntu",
            "platform": "ubuntu",
            "type": "linux",
            "version": "20.04.5 LTS (Focal Fossa)"
        }
    },
    "http": {
        "request": {
            "body": {
                "bytes": 55
            },
            "bytes": 211,
            "headers": {
                "content-length": 55,
                "content-type": "application/x-www-form-urlencoded"
            },
            "method": "POST"
        },
        "response": {
            "body": {
                "bytes": 8936
            },
            "bytes": 9108,
            "headers": {
                "content-length": 8936,
                "content-type": "text/html; charset=utf-8"
            },
            "mime_type": "text/html; charset=utf-8",
            "status_code": 404,
            "status_phrase": "not found"
        },
        "version": "1.1"
    },
    "method": "POST",
    "network": {
        "bytes": 9319,
        "community_id": "1:LREAuuDqOAxXEbzF064U0QX5FBs=",
        "direction": "unknown",
        "protocol": "http",
        "transport": "tcp",
        "type": "ipv4"
    },
    "query": "POST /register",
    "related": {
        "hosts": [
            "packetbeat.com"
        ],
        "ip": [
            "192.168.238.50",
            "107.170.1.22"
        ]
    },
    "server": {
        "bytes": 9108,
        "domain": "packetbeat.com",
        "ip": "107.170.1.22",
        "port": 80
    },
    "source": {
        "bytes": 211,
        "ip": "192.168.238.50",
        "port": 64770
    },
    "status": "Error",
    "type": "http",
    "url": {
        "domain": "packetbeat.com",
        "full": "http://packetbeat.com/register?address=anklamerstr.14b&telephon=8932784368&user=monica",
        "path": "/register",
        "query": "address=anklamerstr.14b&telephon=8932784368&user=monica",
        "scheme": "http"
    },
    "user_agent": {
        "original": "curl/7.37.1"
    }
}

ICMP

Configuration options

Also see Common protocol options.

enabled

The ICMP protocol can be enabled/disabled via this option. The default is true.

If enabled Network Packet Capture will generate the following BPF filter: "icmp or icmp6". Fields published for ICMP packets.

Exported fields

FieldDescriptionType
@timestamp
Event timestamp.
date
client.bytes
Bytes sent from the client to the server.
long
client.geo.city_name
City name.
keyword
client.geo.continent_name
Name of the continent.
keyword
client.geo.country_iso_code
Country ISO code.
keyword
client.geo.country_name
Country name.
keyword
client.geo.location
Longitude and latitude.
geo_point
client.geo.region_iso_code
Region ISO code.
keyword
client.geo.region_name
Region name.
keyword
client.ip
IP address of the client (IPv4 or IPv6).
ip
client.port
Port of the client.
long
client.process.args
The command-line of the process that initiated the transaction.
keyword
client.process.executable
Absolute path to the client process executable.
keyword
client.process.name
The name of the process that initiated the transaction.
keyword
client.process.start
The time the client process started.
date
client.process.working_directory
The working directory of the client process.
keyword
cloud.account.id
The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier.
keyword
cloud.availability_zone
Availability zone in which this host is running.
keyword
cloud.image.id
Image ID for the cloud instance.
keyword
cloud.instance.id
Instance ID of the host machine.
keyword
cloud.instance.name
Instance name of the host machine.
keyword
cloud.machine.type
Machine type of the host machine.
keyword
cloud.project.id
Name of the project in Google Cloud.
keyword
cloud.provider
Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean.
keyword
cloud.region
Region in which this host is running.
keyword
container.id
Unique container id.
keyword
container.image.name
Name of the image the container was built on.
keyword
container.labels
Image labels.
object
container.name
Container name.
keyword
data_stream.dataset
Data stream dataset.
constant_keyword
data_stream.namespace
Data stream namespace.
constant_keyword
data_stream.type
Data stream type.
constant_keyword
destination.bytes
Bytes sent from the destination to the source.
long
destination.geo.city_name
City name.
keyword
destination.geo.continent_name
Name of the continent.
keyword
destination.geo.country_iso_code
Country ISO code.
keyword
destination.geo.country_name
Country name.
keyword
destination.geo.location
Longitude and latitude.
geo_point
destination.geo.region_iso_code
Region ISO code.
keyword
destination.geo.region_name
Region name.
keyword
destination.ip
IP address of the destination (IPv4 or IPv6).
ip
destination.port
Port of the destination.
long
ecs.version
ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices -- which may conform to slightly different ECS versions -- this field lets integrations adjust to the schema version of the events.
keyword
event.category
This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories.
keyword
event.dataset
Name of the dataset. If an event source publishes more than one type of log or events (e.g. access log, error log), the dataset is used to specify which one the event comes from. It's recommended but not required to start the dataset name with the module name, followed by a dot, then the dataset name.
keyword
event.duration
Duration of the event in nanoseconds. If event.start and event.end are known this value should be the difference between the end and start time.
long
event.end
event.end contains the date when the event ended or when the activity was last observed.
date
event.kind
This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not.
keyword
event.start
event.start contains the date when the event started or when the activity was first observed.
date
event.type
This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types.
keyword
flow.final
Indicates if event is last event in flow. If final is false, the event reports an intermediate flow state only.
boolean
flow.id
Internal flow ID based on connection meta data and address.
keyword
flow.vlan
VLAN identifier from the 802.1q frame. In case of a multi-tagged frame this field will be an array with the outer tag's VLAN identifier listed first.
long
host.architecture
Operating system architecture.
keyword
host.containerized
If the host is a container.
boolean
host.domain
Name of the domain of which the host is a member. For example, on Windows this could be the host's Active Directory domain or NetBI